Bars and chains are model-specific based on engine displacement. Small engines have the rare 8" and 10" and more common range of 12 - 16" bars. Midsize saws use 16 - 24" bars. Large engines use up to 48 - 60" bars. See the Oregon link below.
The answer depends on the size of the bead and the size of the hole in the center of the bead, as wells the size of the chain. Take your bead and chain to a local bead shop. Ask the clerk if she has a sterling spring ring that would fit through th bead and around the chain. That would be the most reasonably priced solution. If not, someone at the store would proboably make you a little sterling hanger just for the price of materials. This would also be quite reasonable and quick. Making a silver hanger for the bead is very basic beading work. So, the shop would know someone to do it for you if they are too busy. Most bead stores offer classes. You might decide to take a class in beginning wire wrap, or working with head pins. Either would teach the techinque of putting a silver wire through the bead, making a loop around the chain, and neatly wrapping the wire at the bottom of the loop so it is secure. Presto, the bead is on your chain and looks great.
Probably not, since the gap that the donated larynx would have to fit would be a different size to the original gap. Hence the voice would be distored.
That would require different rims.That would require different rims.
The chain size is 530. it was an O-ring from the factory.
chain size is 630 pitch, o-ring style chain recommended
the size of chain on the 1981 kz650 is a 530 or 630 chain. that is a pretty good chain in my opinion because it is very strong and it is pretty thick.
size 13 - 13.5
A numbered size in womens clothing usually refers to pants, suits, or dresses. A woman that would wear a size 18 dress, would find a top to fit in a department store. There she can try on a variety of sizes, as different clothing manufacturers unfortunately have different dimensions. Some department stores include Macys, Younkers, and Walmart.
If you have a stock Husqvarna 345 with .325 pitch chain you would need a 3/16" file. http://store.chainsawr.com/
No way to tell, as it will be different depending on bike size and sprocket tooth count. Bike chains are always sold overly long and are then cut to size.
Hi,The chain for a GSX750 as standard is 96 links long,size 630.
The 034 takes either a .325" or 3/8" pitch chain. My guess would be 3/8 .050 go to chainsdirect on eBay chose the chain for youre bar size.