http://www.popularmechanics.com/cars/how-to/maintenance/4213448
rplaced and bleed brackes on a 95 Honda civic but still no brakes
use a little boy
To put brakes pads on a 1994 Honda Civic, you will need Bleed brake fluid.
Start pumping it first then go about bleeding the break fluid
If you replace any brake component that breaks the brake fluid seal or you let it get very low of brake fluid, yes, you must bleed the brakes.
Open brake fluid reservoir for the brakes - make sure it is full of brake fluid - put lid back on reservoir then pump the brakes then hold the brakes on - have someone open the bleed screw on the brakes and let the air and oil out and close it again quickly and repeat until the air bubbles stop in the brake fluid, also checking to make sure you do not run out of brake fluid before you finish bleeding the brakes.
You bleed the brakes just like you bleed any other cars brakes, there is no special way to bleed anti-lock brakes.
you can gravity bleed by opening up bleed valves,pump them up using a someone to open bleeder valves when there is pressure,vacuum bleed with a vacuum pump ,but you might have to use a scan tool to open up abs solenoids to bleed brakes.
There is still air in the system.
how do i bleed brakes on a 2003 hyunia xg350
If you have to ask how to bleed brakes, do not do it yourself.
dot 3 or 4. bleed the brakes and fill with the same type