answersLogoWhite

0


Best Answer

What kind of vehicle is the XE?

User Avatar

Wiki User

17y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Can the AC clutch bearing be replaced without removing compressor on 01 XE 4cyl 2WD?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Can AC Clutch be replaced without physically removing the Compressor on 1997 Mercury Sable?

The AC clutch cannot be replaced without physically removing the compressor on a 1997 Mercury Sable. The compressor and magnetic plate must be removed before you can access the clutch.


How do you replace AC compressor bearing without removing the compressor on a 1998 chevy Silverado?

Doesn't matter - if you open up the compressor, you open up the AC system. By law, this must be done by an ASE certified technician in an EPA approved shop with the proper equipment to evacuate and store the refrigerant. This prevents refrigerant from being released into the atmosphere. Whenever the AC system is opened up, the receiver-drier (if it's a Thermal Expansion Valve system) or accumulator (if it's a Fixed Orifice Tube system) must also be replaced.


Can you replace belt on 3.1 v6 without putting ac compressor back on?

Most of the time, there is no way to route the belt without all the pulleys in place. As long as the bearing in the clutch on the AC turns it is alright, the compressor itself does not need to work.


What is the difference between bearing and non bearing walls?

A bearing wall is one that supports or bears the weight of floors, walls and or roofs above it, while a non-bearing wall is simply separating areas. You can easily remove a non-bearing wall without much of a problem, but removing or modifying a bearing wall could be very difficult or impossible without causing a collapse.


Can you replace engine bearings without removing engine from car?

In some cars, you can get the rear bearing by dropping the transmission. For the rest, no.


When to lubricate a bearing?

when installing them always pack the bearings with grease, if the bearing has been run without grease and making a roaring sound it is probably bad and needs replaced


On a 95 Cadillac Sedan Deville can the AC clutch be replaced without removing the compressor from the car?

AnswerNormally the answer is yes.What special tools do you have to use? Need advice on how to do this. I need for the serpentine belt to work even if the air conditioner doesn't. Thanks for any help you can give me on this.


Can the AC pulley and clutch be replaced on '94 Mercury Grand Marquis without removing the AC compressor from the car?

Yes, it can. But on a 1994, you are better off discharging the system, replacing the unit as a whole, and then recharging the system. This will enable you to find any problems in the A/C system that are unknown.


How can you remove an aircondition compressor without losing the refrigerant?

Before removing the compressor from a refrigerator or other appliances, you must 'reclaim' the refrigerant. This is done by connecting a compressor-pump on the access connection and pumping the refrigerant into an approved storage tank. once the refrigerant is out of the system, you crimp & cut the lines going into the compressor. There will be compressor lube in the compressor; don't spill it or let it leak out.


Replace rear wheel axle bearing 1997 cavalier?

Easy as pie, pull off the drum, take the 4 torx bolts out of the back of the bearing and pull it out without removing brake parts


You put an ac compressor in your 97 mustang and its making noiseswhat could it be?

The system is very dirty from the first compressor that went out....... If you just replaced the a/c compressor without changing the expansion tube, the accumulator and flushing out the complete system then it will never work correctly......


Why does the air condition compressor not turn on a 2003 silverado?

Well, the question is a bit vague. Is the flywheel to the compressor clutch turning? Does the compressor clutch engage? What exactly is it doing? There are several possibilities here.. a bad low pressure sensor, a seized bearing in the compressor, an overcharged refrigeration system.. kinda difficult to narrow it down without knowing specific symptoms.