0
How do you replace AC compressor bearing without removing the compressor on a 1998 chevy Silverado?
Doesn't matter - if you open up the compressor, you open up the AC system. By law, this must be done by an ASE certified technician in an EPA approved shop with the proper equipment to evacuate and store the refrigerant. This prevents refrigerant from being released into the atmosphere.
Whenever the AC system is opened up, the receiver-drier (if it's a Thermal Expansion Valve system) or accumulator (if it's a Fixed Orifice Tube system) must also be replaced.
What else can I help you with?
How do you take the throw out bearing out of a 1990 Chevy silverado 350?
you have to remove transmission to take out and replace throwout bearing
Instructions to replace a 1999 Grand Prix GTP ac compressor?
To replace the AC compressor in a 1999 Grand Prix you must first remove the AC belt. Then disconnect the negative battery cable before removing the compressor bolts and connectors and removing compressor.
How do you change the shaft seal on the air conditioner compressor on a Chevrolet Silverado 2000?
Usually the shaft seal is installed from inside the compressor housing and is not serviceable. You would need to replace the compressor.
How do you replace a wheel bearing on a kawasaki mule 3010?
You can replace the front wheel bearing, on your Kawasaki Mule 3010, by removing the axle. With the axle Remove the wheel bearing will slide off.
What could be the problem if my ac compressor is making a rattling noise when turned on a1992 silverado 1500 v8?
It means that the compressor is broken inside, and it is time to replace it.
How do you replace the right front wheel bearing on a 1995 Ford Contour?
You must remove the spindle a get to the bearing .The bearing is pressed into the spindle,this is not an easy task, removing the spindle involves disconnecting or removing brakes,tie rod ,lower ball joint,ect
How do you replace a front wheel bearing on a 1992 Chevy silverado 1500?
You will need to remove the tire and wheel. Remove the axle end cap. Remove the wheel bearing seal. Remove the wheel bearing. Reverse the process to install the new will bearing.
How do you change a 2005 Chevy silverado front wheel bearing?
It's a sealed unit with the hub. You have to replace the whole hub assembly.
How do you replace the right front wheel bearing of a 2001 Nissan Maxima?
The front wheel bearing on a 2001 Nissan Maxima is replaced by removing the wheel, prying off the bearing cover, and removing the retaining pin. The retaining nut can then be taken out, the calipers removed, and the rotor pulled to allow access to the bearing.
Why do u need to replace the ac compressor?
Generally, because something is wrong with it. Maybe a bearing went out, maybe the compressor is just worn, maybe it was damaged because of a refrigerant overcharge, compressor oil overcharge, or the wrong type of compressor oil used. Could be a number of reasons.
Can you replace engine bearings without removing engine from car?
In some cars, you can get the rear bearing by dropping the transmission. For the rest, no.
How do you replace the air conditioner clutch and bearing assembly on a 2001 Chevy Impala?
Get a reman compressor and don't bother dicking around with the lame one.
