It can cost up to about 2000 dollars to replace the clutch in the 1992 Toyota pickup. This varies with the type of parts required and with where you are located.
No,It is ahydraulic clutch, try to bleed the unit first and see if that helps.
Please be more specific.
1992 Chevy trucks did not have a CAM SENSOR. They had a distributor.
There is NO adjustment on that year. You either have a BAD Clutch slave cylinder are the clutch and pressure plate is worn out.
i need rear break digram for my Chevy 1500 k pick up where can i find it.
That year model did not have a modulator valve on the transmission.
how do you replace a CV joint on a 1992 Chevy pickup?
Where is the AC sensor located on a 1992 GMC pickup
how do you remove the fan clutch on a 1992 318i 1.8 liter?
your clutch may be slipping ,first check and see if your clutch slave cylinder is leaking,check your clutch master cylinder to see if your fluid level is ok.if level is ok and no leaking slave cylinder,then you probaly need a new cluch.
Clutch repair for a 1992 Sierra will depend on the problem. Clutch systems consist of the clutch, pressure plate and a master and slave cylinder. These parts are not repairable, and the part that has failed will have to be replaced.
Yes, all miata's have a hydraulic clutch.
what size rims are on a 1992 chevy 1500 w/t truck
Yours has the 4L60E transmission in it because it is a 1/2 ton truck. The 3/4 tons used the 4L80E in them.
Yes as long as the 95 is a 4L60E also. Remember that a 2-wheel and a 4-wheel drive transmission will NOT interchange.
only adjustment is under dash on the master cly needs free play so it can return throwout bearing, under hood just open slave bleeder screw an close. if the don't cure it then clutch needs to be replaced.
How do you flush the raditor on a 1992 GMC Sonoma Pickup.
== == == ==
with no problem. you could bolt a 572 in. remember trans will have to be a 4l80e trans. and if its carb just use a turbo 400 trans
No. No such thing.
1992 Chevy 1500
Yes it does