Want this question answered?
Joist possibly ? A joist is the boards under the floor and above the ceiling that span the room or building. What the floor or ceiling is attached to.
Treated lumber should be used in outdoor construction. There are different types of treated lumber, some are for above ground use and some are for below grade use.
No,if the joist is merely butted.The joists must sit on a bearer type of situation or have joist-hanger connectors.
See this link.
unless you got a great deal on them, it would never make $$$ sense to use a microlam in lieu of a TJI joist or dimensional lumber. . .microlam is too costly if you have them on hand, I would call the manufacturer. . .they should be able to give you the numbers or send you a book with the span charts
Yes, allow the pressure treated wood to dry to allow for shrinkage.
A 'P' clip or a 'Talon' clip.
There are chemical used in the pressure treatment that may be harmful.
A 20 delta size nail should be used to attach the band joist to a joist when end nailing. A 16 D can also be used.
Do you mean what can soft wood be used for. Here are some uses. Roof trusses/ floor joist/ ceiling joist/ stud partitions/ timber flooring/ wall strapping/ linning boards internal finnishing. ect
I worked on a '96 that had 2 x 8s.
"Treated" lumber COULD have several meanings, but it usually means treated to resist rot and attack by insects. Early treatments included creosote (thin railroad ties). "Green" lumber was treated with Chrome, Copper, and Arsenic. Due to health hazards, wood a consumer would be likely to come in contact with (handrails, etc) are now treated with a Copper Boron mix. These woods are used for outdoor stairs, decks, docks, gazebos, etc.- anywhere you would have direct contact with the ground. In Hawaii, the Formosa Termite can do GREAT damage to lumber, so much of the house that is built in Hawaii uses treated lumber.