answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: Can use 10w30 oil in lawnmowers requiring sae30?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What if you use 10W30 instead of SAE-30?

If the recommended oil is SAE30 why would you use SAE 10W30? Some mowers recommend either of these weights but if your recommends 30W then using 10W30 will cause it to use oil.


What kind of oil should you use in a Craftsman lawnmower GT5000?

10W30 can be used, but SAE30 is best. 10W30 can run a bit hot, in warmer climates.


What weight motor oil should you use in your craftsman riding mower?

If it has a Briggs and Stratton engine you need SAE30. If it is a Kohler it uses 10W30.


Can you use 15w-40 motor oil in a5hp Briggs engine?

It is a little thick. You should use sae30 or 10w30 (on cold temperature)


Can you use 10w30 sae 30 oil engine?

I am not sure what you are wanting to use the oil for. If it is for a lawn mower, most of them take either 10w30 or SAE 30. They are not the same oil. You will need to refer to your engine manufacturer for the oil required for your engine. Normally most Briggs and Stratton and Tecumseh engines use the SAE30 oil. While most Kohler engines use 10w30.


What oil goes in bridges and stratin?

Briggs & Stratton small air cooled engines use SAE30 weight oil or SAE 10w30 if they will be operated in cold conditions. I highly recommend you use Synthetic oil in any air cooled engine.


Can you use motor oil in push mower?

If it is a 4-cycle engine you definitely need motor oil. If its a 2-cycle engine then the oil is mixed with the gas. If its a reel mower then no oil is needed except for external lubrication. Depending on the engine manufacturer the 4-cycle engines will require either SAE30 or 10w30 motor oil.


Oil for a Kia Spectra?

10w30 10w30


What oil is used in a troy built lawn mower?

SAE30


Why viscosity is important for engine oil?

Viscosity tells you the speed at which the oil will flow. The lower the viscosity the faster the oil will flow at 210 degrees fahrenheit as in an SAE30 weight oil. Any oil with a W attached such as SAE 10w30 means the oil was tested at a cold temperature and will flow as a 10 weight when it is cold and then performs as a 30 weight at 210 degrees.


Can you use 10w30 oil in a lawn mower that takes sae30?

If the manufacturer of the lawnmower specifies only SAE 30 then do not use SAE 10W-30. However on most mowers you can use either weight. I highly recommend you use synthetic oil in any air cooled engine.


Can you use sae30 oil in a Honda hrx476 mower?

Use exactly what Honda recommends and nothing else which is SAE 10w30 for general use. Using anything else may void your 7 year warranty. I recommend you use synthetic oil in any air cooled engine.