Yes. You need two gated input SR flipflops, and an inverter. Connect the Q output of the first flipflop to the S of the second. Connect the notQ output of the first flipflop to the R of the second. Connect the clock to the gate input of the second flipflop, and to the input of the inverter. Connect the output of the inverter to the gate of the first flipflop.
The offline UPS is in standby mode. The charger is maintaining the battery, but the inverter stage is not running. Power goes from input to output, bypassing the inverter. In this configuration, the charger and inverter design is less, as the charger is usually in trickle mode and the inverter does not need to run continuously. On power fail, the inverter starts up and takes the load. There is a glitch in output, a few line cycles, but most loads can handle this. The online UPS runs all the time. The charger now runs the inverter, as well as maintaining charge on the battery. The inverter supplies the load. Power goes from input to charger to inverter to output. In this configuration, the charger and inverter design is more, as they need to run continuously. On power fail, there is no glitch, because the inverter is already running and supplying the load. Usually, there is synchronization between the inverter and the line, so that failure of the inverter can initiate fall-back to the line without glitch.
type of inverter
You do not need to use an external variable frequency drive for the said AC. You have mentioned that it is inverter AC. It means the AC is already fitted with a built in inverter. Even if you connect an inverter to the AC, you need another control device to control the VFD to control the speed of the fan/ compressor depending upon the room condition, external temperature, temperature setting etc. It is little complicated.
what is the main function of transformer in inverter
Ups can be connected to an inverter since it does not exceed the rated voltage
*an
Inverter is the one which converts DC to AC. UPS is the one which provides you uninterrupted power supply. UPS as a system comprises of converter (converts AC to DC), battery, battery charger circuit and an inverter (converts DC to AC). Inverter is part of UPS.
In UPS ,the main power comes to the UPS and is used to charge a battery inside. The output from the battery is fed into a sine wave inverter which converts DC into AC and feeds to the computer in case of a power failure. In such a scenario, the battery is stopped from charging and instantly starts to supply power to the computer. In Inverter ,AC is converted into DC and then is used to charge the battery. When the power supply goes off, the relay triggers the switch from mains to inverter. It is the use of a sensor and a relay that is the main difference between a UPS and an inverter, otherwise the two are same. And the use of relay and sensor cause the time delay in power supply from an inverter.
UPS (UNINTERUPTED POWER SUPPLY ) Its charg only AC current (Alternating current). and inverter provide current DC TO AC ( Direct current to Alternating current)
yes, i am using microtech 850 UPS with Exide 1500 AH Battery
yes, just dont connect your iron!
An inverter simply takes a DC voltage, usually from a battery, and converts it to AC for use by standard appliances. A UPS does the same thing, but has added circuitry to charge the battery when AC utility power is available, and to automatically switch the inverter on when utility power fails.
Online UPS on the other hand uses an Inverter which always on to give sine wave AC in the output socket. The incoming AC is first converted into DC by a transformer to charge the battery as well as to give power to the inverter transformer. The inverter transformer converts the DC to AC continuously to power the load. If power fails, the battery backup circuit switches on and takes the load. Online UPS is more efficient than the Offline UPS and uses a "Constant duty Inverter". It also has a "Static bypass" system that transfers the load to the AC power if the inverter system fails. The advantage of the Online UPS is that, it clean up the AC waveform by converting it into DC then reconverting this DC to fresh AC.
To provide gating pulse for power electronic switching device in Inverter. It decides frequency of output, hence should be monitored carefully.
50 kva ups battery back up
Yes. You need two gated input SR flipflops, and an inverter. Connect the Q output of the first flipflop to the S of the second. Connect the notQ output of the first flipflop to the R of the second. Connect the clock to the gate input of the second flipflop, and to the input of the inverter. Connect the output of the inverter to the gate of the first flipflop.