0
Would not recommend it. If you don't want to blow out your lights (yes, LED lights can do that too), you need to neck the current down to the recommended amperage for that light system, which is going to require a fuse or circuit breaker. Also, you need to have the appropriate voltage going to it.. 230v seems a bit high for just a 16 LED light system.
What else can I help you with?
Can you apply 230 v ac to kbpc2510?
we can apply 230v ac to kbpc2510 maximum peak voltage is 325v (for 230v) and its blocking capacity is about 1000v so we can use it (I used for the same application)
Can you give 230V ac directly to bridge rectifier?
Yes, if the diodes that the bridge rectifier are rated for 230V in forward and reverse voltages. Normally you can do a search for the part number on the internet and get specs there.
What happens when you connect 230V ac supply directly to a diode?
You get a violent explosion as the diode vaporizes.
What happens when a 230V dc series motor supplied by 230V ac?
it will not run
Can PVC bell wire be operated at 230v?
No bell wire is not meant to be 230V.
What happened if you connect 230V to secondary of transformer whose voltage rating is 230V to 18V?
if you drove the 18V winding with 230V the transformer would burn out, if it didn't catch fire first
What happens when you pass a 230V ac supply to a man and what happens when you pass 230V dc supply to a man?
He dies.
How do you wire a 4 lead 230v to a 3 lead 230v terminal?
connect the Red Yellow blue phases
How do you get 1 phase 230V from 3 phase 230V?
I depends on what you are connecting to it but you only need 1 of the phases providing you can get to a neutral
What does 230V stand for?
230 Volt
What happens when you connect 230V ac supply directly to a diode with the help of resistor of the order kilo ohms?
When you connect 230V ac supply directly to a diode with the help of resistor of the order kilo ohms, the diode will conduct on alternate half cycles. Forward bias current will be 230ma for 1KOhm, or 23ma for 10KOhm. Power across the resitor will be 25W for 1KOhm, or 2.5W for 10KOhm. Bottom line - the resistor will get very hot - and if not rated correctly, will be destroyed.
What is the maximum power consumption of the appliance when operating at 230V 50Hz?
The maximum power consumption of the appliance when operating at 230V 50Hz is determined by multiplying the voltage (230V) by the current (in amperes) that the appliance draws. This calculation will give you the power consumption in watts.
