no
is the quick answer. if it is because the key wont turn (very common on these) you can still start it by holding the key in the immobilizer pickup and turn the ignition switch with a screw driver but you might have to drill the retaining pin out of the lock barrel.
my 1998 ford fiesta lx zetec wont start againt fuel pump not working or is it the immobilizer how can i tell?..and can i bypass the immobilizer
english
It's an anti-theft device. It wouldn't be a very good one if it was easy to bypass. So, even if you could, I would not tell you how.
Hi how I can bypass or cut of immobilizer for renalt clio 1998 1.2 8v 59hp imobilaizers is in main block ecu
You cannot bypass the immobilizer. There is a reason for that. You will have to contact Toyota and have proof of ownership of the vehicle first then they will have you bring the car in for services.
The immobilizer on a VT Commodore must be bypassed before you can tow it. To bypass the immobilizer, remove the body control module.
run a live an earth straight from the battery to the fual pump servo unit, will start straight up
Jjf
The bypass operation is more difficult to complete than having a mechanic make new keys.
The short answer is - you don't!! wouldn't be much of an immobilizer if it were easy to bypass. You need to either fix the fault which is causing the problem, OR send the engine ECU off to a specialist who can reprogram it to disable the immobilizer
i think you need to burn it out:)
dont know