The low pressure port on a 1996 Oldsmobile Cutlass is between the compressor and the firewall. It is on the larger hose attached to the compressor.
Begin by loosening the tensioner pulley on your 1999 Oldsmobile Cutlass. Put your serpentine belt around the pulleys. Tighten the serpentine belt with the tensioner pulley.
you can't you have to replace it!
Passenger side under the hood
It is located on the front bottom of the engine block right beside the air conditioning compressor. You have to look from underneath the car. It's really tough to get at though.
There is only 1 way the serpentine belt will go on, there is no alternate way.
There should be a diagram there. If not go to an autoparts store and they can find out for you.
My 1986 Olds Cutlass Calais doesn't have a serpentine belt. It has a separate alternator belt. How do I change it?
Yes it can be done, you're going to have to measure with a string basically and tie a knot at the string once you've ran it around all the pulleys you want to turn. Take that string to the parts store and have them go through their belt assortment and find the closest one. Then you will have to take the slack out of by adjusting your alternator in or out
Low pressure line Larger line running from compressor
Oldsmobile Cutlass was created in 1961.
On a 1997 Oldsmobile Cutlass Supreme, the low side service port for the AC is behind the engine. It is the larger of the two hoses coming off the compressor.