Want this question answered?
Most likely the bulb has blown. you need to remove the clock and two bulbs in the back (halfords 509t) to remove the clock. take out the two blower vents. there are two screws behind undo these and the clocks off. sam
you have to take off the cowl around the clocks, then the clocks just unclip from the dashboard (no wires or cables) and pop out the wasted bulb and replace with the new one. while your at it, why not put in coloured bulbs for the clocks, to pimp it a bit replacing is just as easy as taking the clocks out
yes they have to be coded
t5 bulb
how do you change a heater matrix on 1.2 corsa 52 plate
How do you change a sidelight bulb on a 53 plate corsa
You have to remove the airflow on the front panel underneath the clock . You will find two small screws. undo those and the clock will pull up. Unclip the power feed wire and turn the bulb anti clockwise to remove.
No, the clock spring is a connector and is not considered an active sensor.
2000
you have got to change the hole bumper
After how many kilos you change timing belt on a opel corsa bakkie 2007 1400 engin
hammer