0
With a self adjusting tensioner pulley, there is no adjustment for tension.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How do you change a belt?
if ur talking about a serpetine belt u remove the old one by releasing the tension on the belt by put a 1/2 drive ratchet into the tensioner pully and release the tension on the belt and remove it then follow the diagram on how to run the belt and then pull the tensioner and place belt with that pully into the pully drive run and then release and ur new belt is on
How do you relieve tension on serpentine belt of 97 buick park?
put a wrench on the tensioner pully and pull it to release tension on the belt
Where is the tensioner pully on a 1992 Lexus sc300?
Where is the tensioner pully on a 1992 Lexus sc300
How do I ID the specific name of the pulleys for the belt on the engine. it is not the tensioner with it's connected pulley. The pully is located in the center at the top and appears smooth?
It is called an Idler pully and is not there to tension the belt.
How to change tension pulley on a 93 dodge dynasty?
I HAD TO REPLACE MY SERPENTINE BELT BUT ENDED UP HAVING A MECHANIC DO IT FOR ME AND AT THE SAME TIME HE SAID THAT IT TOOK A SPECIAL TOOL TO REMOVE THE TENSION PULLY. THE TENSION SPRING ON THE PULLY HAD FROZEN. Ive replaced both the tensioner pulley and tensioner assembly on my 90 Dynasty 3.3 there are no special tools required its a 15mm both for both the pulley and assembly, tho there is a bit of patience required as neither is very easy to get to but its not terribly diffcult
2004 Dodge stratus 2.4 dohc Tension puller for timing chain?
Tensioner PULLY is behind the timing BELT cover
How do you retract the belt tensioner pully on a 2000 Chevrolet Blazer?
You put a 14mm wrench or socket on the bolt and pull it towards the passenger side. That will loosen the belt. The tension is set automatically by the tensioner.
What size is the bolt for tensioner pully on 1999 dodge caravan?
It should be a 16mm on the front, to release and put tension on. To remove the tensioner pulley completely, I believe the nut that holds it on from behind is a 15mm.
What belt tensioner tool is needed for 1999 Ford E-350 Van with V6?
you do not need a tool to tension pully belt if belt is loose, belt needs replacing tensioner works automatically
How do you tension a belt?
if the car doesn't have an automatic tensioner than if the belt is around the alternator pully you loosen the bolt holding the alternator on and move the alternator to tighten the belt.
Where is the tension adjustment for a 1990 Buick lesabre serpentine belt?
Serepentine bels do not have tension adjustments, there is a tension pully That is preloaded with a coil spring in it. If the belt is loose, the pully spring may have lost it tension. Replace the pully assembley.
How do you loosen a tension pully on a 1997 ford escort?
You insert a 3/8 inch ratchet or breaker bar and pull back to release the tension. This way you can get a new belt on. Tensioner is self adjusting and needs no further attention.
