Smart aleky answer: Yes. You manually plug in the OBD II code reader into the port under the dash and manually read the problem displayed on the screen. If, by "manually" you mean the pre OBD II days where you jumpered a connection and watched a light flash on the dash the answer is, unfortunately, no. Systems have become far too sophisticated and you'd be counting Morse Code type long and short flashes for hours trying to figure out what the computer is trying to tell you. The good news is, OBD II readers are loaned free by many auto supply stores. In many cases you can grab the reader, plug it in in the store parking lot, read the code and walk right back in to purchase the appropriate part (which is why they loan you the gizmo for free). Cheers
Depends on the year...if it's an OBD1 car (typically before 1996) you can manually access the codes and find out what they are by watching the "check engine" light blink. If it's an OBD2 car, then no...you have to have a code reader. The good news is that many auto parts stores will read the codes for you for free. Just be careful listening to their diagnosis.
Toyota engine code 402
use an OBD-I code reader.
It takes a scanner to read the codes.
The computer stores the codes until it is reset manually. The check engine light does not have to be on to check the codes.
Go to----- http://www.extreme-check-engine-light-codes.com/Toyota%20OBD1%20Decoder.htm---- for this info
You need an OBD2 code reader to check the codes. Just plug it in under the hood and read the codes. Use the manual to determine the codes.
The ECM (computer) does self tests of components while the car is running or driving. It will turn on the light when it finds a component that is out of the specified range of operation. Scan it or retrieve the codes manually to see where the problem lies.
Take it to auto zone and have the codes read for free.
Engine check light comes on, and you have the codes read.
How do I get engine codes for 1999 toyota corolla?
Go on the web and goggle it. (TOYOTA CODES)