answersLogoWhite

0

Morse Code

Although cellphones and SMS have pretty much made Morse Code moribund - its most popular current use is probably by amateur radio operators - this is a sub-category dedicated to the dots 'n dashes of the code that was invented by Samuel F.B. Morse in 1838. Find out "What is the most famous distress signal in Morse Code?" or "How do you communicate using Morse Code?

604 Questions

How long did it take to create the Morse code?

Morse code was developed over several years during the early 1830s and 1840s by Samuel Morse and Alfred Vail. The first version was completed in 1836, but it underwent various modifications and improvements until it was officially adopted in 1865. Thus, the development process spanned nearly three decades, with significant advancements made during its formative years.

Where did Samuel Morse live in his adult hood?

In his adulthood, Samuel Morse primarily lived in New York City. He moved there in the early 19th century, where he became a prominent painter and later an inventor. Morse also spent time in Washington, D.C., and other locations due to his work and travels, but New York remained his main residence.

How do you make a Morse code telegraph machine which connects with wire like in World War 2?

To make a Morse code telegraph machine, you'll need a power source (like a battery), a switch (key), a sounder or buzzer, and insulated wire. Connect one end of the wire to the battery and the other to the key, then connect the key to the sounder. When the key is pressed, it completes the circuit, creating audible clicks that represent dots and dashes in Morse code. Ensure the setup is secure and that the connections are properly insulated to prevent short circuits.

What Is the choral piece at the end of inspector Morse the infernal serpent called?

The choral piece at the end of "Inspector Morse: The Infernal Serpent" is called "The Dream of Gerontius," composed by Edward Elgar. This work features a poignant choral section that enhances the emotional depth of the episode's conclusion. It reflects themes of journey and introspection, aligning with the narrative's exploration of morality and the human experience.

What is the sender of Morse code called?

The sender of Morse code is commonly referred to as a "telegrapher." This individual transmits messages using a series of dots and dashes that represent letters and numbers. The telegrapher operates equipment like a telegraph key or an electronic device to send and receive these coded signals.

What device allowed Morse code to be sent underwater in 1915?

In 1915, the device that allowed Morse code to be sent underwater was the "submarine telegraphy" system, specifically utilizing the "submarine cable" technology. This system transmitted electrical signals through insulated cables laid on or beneath the ocean floor. By using variations in electrical currents, operators could effectively send Morse code messages underwater, facilitating communication between ships and shore stations.

What were the implications in the Frederick v Morse case?

In the Frederick v. Morse case, the Supreme Court ruled that schools could restrict student speech at school-sponsored events, particularly when it promotes illegal drug use. This decision set a precedent for how schools can regulate student expression, emphasizing the balance between students' First Amendment rights and the need for a safe educational environment. The ruling affirmed that schools have a vested interest in preventing drug use among students, thereby allowing for greater authority in managing student behavior and speech.

What was Samuel finley breese Morse family?

Samuel Finley Breese Morse was born on April 27, 1791, in Charlestown, Massachusetts, to a prominent family. His father, Jedidiah Morse, was a geographer and a minister, while his mother, Elizabeth Ann Finley, came from a well-respected family. Morse married Lucretia Walker in 1818, and they had three children together, though only one survived to adulthood. His family included notable relatives, such as his brother, who was a member of the U.S. Congress.

What are some codes other than Morse code?

Other than Morse code, some notable codes include the Caesar cipher, which shifts letters by a fixed number in the alphabet, and the Vigenère cipher, which uses a keyword to determine letter shifts. Additionally, there are binary codes, which represent text using combinations of 0s and 1s, and the Braille system, a tactile writing system for the visually impaired. These codes serve various purposes in communication, encryption, and accessibility.

When did Samuel Morse invent the marble cutting machine?

Samuel Morse did not invent the marble cutting machine; he is best known for developing the telegraph and Morse code. The marble cutting machine was invented by another individual named Thomas Edison in the late 19th century. Morse's contributions primarily focused on communication technologies rather than machinery for cutting marble.

What information can be found on a Morse taper angle chart?

A Morse taper angle chart provides information on the taper angle measurements for different sizes of Morse tapers used in machine tools and equipment. It helps users identify the correct taper angle for specific tools and machinery to ensure proper fitting and alignment.

What are the dimensions of a Morse Taper 4 tool holder?

A Morse Taper 4 tool holder typically has dimensions of 0.9375 inches per foot taper and a diameter of 0.9375 inches at the small end.

What are the dimensions of a 2 Morse taper?

The dimensions of a 2 Morse taper are as follows: the small end diameter is 0.700 inches, the large end diameter is 0.938 inches, and the taper length is 2.25 inches.

What are the dimensions of a Morse Taper 1?

The dimensions of a Morse Taper 1 are as follows: the small end diameter is 0.356 inches, the large end diameter is 0.475 inches, and the taper length is 2.25 inches.

What are the dimensions of a Morse Taper 2?

The dimensions of a Morse Taper 2 are as follows: the small end diameter is 0.700 inches, the large end diameter is 0.938 inches, and the taper length is 2.25 inches.

What are the Morse taper specs for this particular tool?

The Morse taper specs for this tool are insert specific specs here.

How do Morse code and binary code compare and contrast in terms of their methods of encoding and decoding information?

Morse code and binary code both encode and decode information, but they use different methods. Morse code uses combinations of dots and dashes to represent letters and numbers, while binary code uses combinations of 0s and 1s. Morse code relies on sound or light signals, while binary code is used in computers to represent data. Both codes require a key or chart to decode the information.

Who are Samuel F B Morse' living descendants?

As of my last knowledge, Samuel F. B. Morse's living descendants include his great-great-grandchildren and their families. Due to privacy reasons and the passage of time, specific details about his living descendants are not widely publicized. Morse's legacy continues through his contributions to the development of the telegraph and Morse code, which revolutionized communication systems worldwide.

Why was Samuel Morse a great inventor of the industrial revolution?

Well, honey, Samuel Morse was a great inventor of the industrial revolution because he developed the telegraph system and Morse code, revolutionizing long-distance communication. His inventions paved the way for rapid transmission of information and laid the foundation for modern telecommunications. So, yeah, he definitely made a mark in history with his clever innovations.

How do you spell out 'Merry Christmas' in Morse Code?

Sure thing, darling. In Morse Code, 'Merry Christmas' is spelled out as: -- . .-. .-. -.-- / -.-. .... .-. .. ... - -- .- ... ...

Mention any 2 code languages used by Hitler with proper meaning?

to eliminate inferior races Hitler used code language. mention any two such words with proper meaning

Is there a code for space in Morse code?

Yes, the Morse code for a space is represented by a short pause or silence between letters and a longer pause between words. It serves as the separator between characters and words in Morse code transmissions.

What does instruction codes look like for any processor chip?

Instruction codes for a processor chip are typically represented in binary format, with each code corresponding to a specific operation such as addition, subtraction, or data transfer. The length and structure of the instruction codes can vary depending on the specific architecture of the processor, but they are designed to be easily decoded and executed by the hardware.