Yes, all you need are the three basics cable wires, which are red, white, and yellow. You connect them to their designates colors and there you go. A set dvd player that you can watch your movies on.
how to connect dvd player to satellite tv?
If you plug your DVD player into your VCR, it will not display on your television. You need to connect your DVD player either directly into your TV via S-video, Component, or HDMI cables or you can connect the DVD player to an audio receiver first, which should then offer an output to the television.
You can attached an additonal DVD player to this TV through the additional input panel that is located on the TV. However, this DVD player is excellent with wonderful quality so there is no reason to install an additonal DVD
You can look at the in and out connectors on the TV and the amplifier. You have choices that depend on the tv and amplifier, basic stereo, surround sound and tos-link. As you know in and out are connected and out and in are connected. Do not connect in and in to each other and do not connect out and out to each other.
you connect the cable in there
You insert the DVD into the DVD player. If no screen comes up on the television, then, make sure all the cords on the back of the DVD player are connected correctly to the television set.
I'm not sure why it goes red but the reason it doesn't play is because the DVD player is not capable of giving 1080p (amount of pixels on the screen) to the TV, it can only give 480p. You would need to purchase a blue ray player to make it work. P.s. blue ray players give 1080p :)
Very very easy. does your DVD Player ( Home theatre ) have a HDMI cable? If it does, you can just buy an HDMi cable and connect it to Hdmi 1 on your tv and the other end to the Dvd Player and the sound a video will be very crisp. Alternatively, you can use an AV cable ( cable with yellow plugs on the end) and connect it to an AV output on your tv and DVD player. If you are using only the tv's sound this will work, but if you are using a amp,etc. you can connect 2 RCA cables to the tv and the amp for the sound.
S-video cables connect picture (such as from a DVD player) to a TV or displaying screen. They will plug into the back of your device and the other end will be plugged into the TV screen. Make sure you match up the holes in the S-Video cable.
Connect the DVD player to a different input on the tv, if there isn't one use a video/audio switcher.
Yes, you will need an adapter to play movies on your new DVD player. If the player is a Blu-ray you will need an HDMI cable.
When you purchase a DVD player, cables for audio as well as video is also included. All you have to do is connect the audio and video cables to your television and your ready to go.