If you mean drilling through the studs of a load bearing wall, yes you can do that.
Take a drill and a drill bit and drill the hole in it or you can use a Bradawl, that's easier you may have one in a tool kit around your house i used one for mine
Yes
To make a hole in or through, with or as if with a drill.
Yes, but not with the usual drill bit. Drilling a hole in glass is accomplished with an abrasive that actually wears a hole through the glass.
Drill a hole through the board
You will either need a hammer and a nail or a drill, for the drill find the small hole in the back and drill through it until you can see through it. For the hammer put the nail in the hole in the back and keep hammering the nail until the orange stick comes out.
15mm drill bit and a drill.
You can drill a hole in the side of anything with the right drill.
Your meaning is not clear. - If you are going to tap the threads in, use a 7/32 drill bit. If you want a hole that this bolt will slip through, use a 9/32 drill bit.
A drill bit (hand or machine) is designed to drill a hole through either wood or metal material.
you can cut a hole in wood using a special drill attachment. alternatively you could drill a hole then cut a hole with a jigsaw
i would use a long shafted hole saw