0
What else can I help you with?
What size is the gas tank in a 2004 ford excursion?
On a 2004 Ford Excursion : ( 166.6 liters / 44.0 U.S. gallons )
What is the length off 2004 ford excursion?
According to the 2004 Ford Excursion Owner Guide ( 226.7 inches long )
How do you change the brake switch in a 2004 ford excursion?
To change the brake switch in a 2004 Ford Excursion, first disconnect the battery to ensure safety. Locate the brake switch, which is typically mounted above the brake pedal. Remove the electrical connector and the mounting screws, then take out the old switch. Install the new switch by reversing the process, securing it in place, and reconnecting the battery.
How many gallons can a 2004 ford excursion hold?
According to the 2004 Ford Excursion Owner Guide : ( 44.0 U.S. gallons )
What is the wheelbase measurement for a Ford excursion?
The 2004 Ford Excursion wheelbase is ( 137 inches )
Does a 2004 ford excursion have a catalytic converter?
Yes
What kind of brake fluid is used for 2004 ford excursion?
DOT ( 3 ) brake fluid , meeting Ford specification ( ESA-M6C25-A ) according to the 2004 Ford Excursion Owner Guide
How many galons in 2004 ford excursion?
44 U.S. gallons
What kind of power steering fluid do you use in a 2004 ford excursion?
According to the 2004 Ford Excursion Owner Guide : ( Motorcraft MERCON automatic transmission fluid is used as the power steering fluid )
What kind of oil goes in a 2004 ford excursion 6.8L V10?
According to the 2004 Ford Excursion owners manual ( 5W-20 engine oil ) is used in the 6.8 liter V10 gasoline engine
Where is the cigarette lighter fuse on a 2004 Ford Excursion?
On a 2004 Ford Excursion : ( mini fuse # 12 is a 20 amp fuse for the cigarette lighter and OBD II ) You can view the 2004 Ford Excursion owners manual online at : www . motorcraft service . com ( no spaces ) Click on Owner Guides ( the fuses and relays section starts on page 169 )
How do you replace the alternator on a 2004 ford excursion 6.0?
To replace the alternator on a 2004 Ford Excursion 6.0, start by disconnecting the negative battery cable to prevent electrical shorts. Remove the serpentine belt by loosening the tensioner, then disconnect the wiring harness from the alternator and remove the mounting bolts. Once the old alternator is out, install the new one by reversing these steps: secure it with bolts, reconnect the wiring harness, and reinstall the serpentine belt before reconnecting the battery. Always ensure to check the belt alignment and tension after installation.
