0
What else can I help you with?
Can you drive with one intake manifold runner stuck open on a 1997 Ford Windstar.?
yes you can
Can you drive your car with a faulty manifold?
You can drive a car with any faulty part, but in doing so it will cause more damage to another part somewhere else. With a faulty Exhaust manifold you will be damaging your Valves, and possible your pistons, connecting rods etc...
Can you drive your car if it needs a new intake manifold gasket?
Yes you can drive it but it will run lean and get poor mileage with poor performance.
On a 1993 Pontiac Grand Prix 31 v6 is the intake manifold on the front and exhaust on the rear?
On the front and rear of what?? The Air Intake Manifold is on the TOP of the engine. the Exhaust Manifold are on the sides of an engine. On a front wheel drive vehicle, the engine is turned 90 degrees, so the exhaust manifold appears to be on the front and back of the engine, below the valve covers.
Where is the knock sensor located on a 2002 chvy 5.3 liter engine in a silverado 2 wheel drive?
Its under the intake manifold.
Why does your 1987 Bronco 2 jump and then die when you put it in drive or reverse?
I would check the idle air solenoid on the intake manifold
Is Ford windstar 1995 front wheel drive?
Windstar mini-vans are front wheel drive.
Is the exhaust manifold the same for a left and right hand drive Jeep Wrangler Sport TJ 4.0L 1998?
It should be the same.. the standard jeep(left hand drive) the intake and exhaust are on the left side of the engine as well, so there is no need for a different manifold. so 99 % sure its the same manifold
Is the 1999 Ford Windstar Front wheel drive?
YES , the Ford Windstar is a front wheel drive vehicle
Where is the knock sensor located on a 2004 Chevy 5.3 liter 1500 4 wheel drive?
That year and engine size has 2 of them and there both underneith the INTAKE MANIFOLD. You can not see are get to them until you remove the intake.
How do you fix code P0660 on a Chrysler pacifica 2007?
Code P0660 on a 2007 Chrysler Pacifica indicates a problem with the intake manifold heater control circuit. To fix this issue, first, inspect the intake manifold heater relay and associated wiring for damage or corrosion. If the relay is functional, check the intake manifold heater element for continuity and replace it if necessary. Finally, clear the code and test drive the vehicle to ensure the issue is resolved.
Where is the coling temperature sensor at on a 1994 Bonneville?
The cooling temperature sensor is located on the drive belt end on the intake manifold on 3.0 and 3.8 liter motors. On 3800 motors it is located on the opposite end of the intake.
