No, if a tie rod is broken you would have no steering control.
Easy answer. You can't travel more than a few feet with a broken tie rod. A tie rod is an essential link between the steering wheel and the tire. A broken tie rod will allow the tire to steer any direction with no control by the driver. --Ken
Your tire will NOT move when you turn the wheel. Also you CANNOT drive slow or anything cuz it will collapse from the top out.
no
no
Rear wheel drive, tie rod ends, pitman arm, gear box itself. Front wheel drive, tie rod ends or the rack and pinion.
The tie rod is a rod acting as a tie in a building or other structure. A tie rod is also referred to as a rod in the steering gear of a motor vehicle.
ya nope i dont drive cars
Yes, it is very dangerous. If the tie rod is worn and it come loose you will loose all steering control and will have an accident which could result in death. Do not drive any vehicle with worn tie rod ends.
Depending on which ones (inside,outside). Inside tie rod ends: slide back dust cover to expose the tie rod end. you will see a spot to place a wrench on the rack side. This will keep you from (twisting) damaging the rack and pinion unit while removing the tie rod end. Holding the rack with your wrench remove the tie rod end with a separate tool. Now for the outside tie rod end: With the wheel off, remove the cotter key from the tie rod bolt. Remove the nut that holds it to the strut. With a tie rod removal tool (pickle fork) wedge the tool between the tie rod end and the strut and pound the end of the tool with a hammer. This will properly remove the tie rod end from the strut. However, if you do not have a "pickle fork" you can use you hammer to drive the tie rod end out from underneath. I do not recommend you use a hammer on a good tie end. Also, count how many turns it takes to remove the tie rod end. Use this number of turns when replacing with the new one. This will @ least get you close to the original spot of the old one makking it safe to drive to get an immediate wheel alignment.
on a steering rack the inner tie rod is threaded and will be the mount for the outer tie rod.
Yes it definitely is dangerous.