0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the largest rear tire you can put on a harley Davidson v-rod?
tubeless marked tire bead made to seat on tubeless rim to hold air and works fine with tubed rim the tube holds the air not marked TUBELESS bead will not seat to hold air
Is a laced rear tire on a harley tube or tubeless?
All Laced wheels on Harleys are tubed, the tires are tubeless, but you need a tube AND rim strip on laced wheels
What is tubeless tire?
A tire that is designed to seal on a rim without a tube inside.
Can you use a tubeless tire on a spoke rim?
No. Spoke wheels are not designed for tubeless tires. Tube only.
Can a tube type tire be used without a tube?
No! Is your answer. However, it all depends on the wheel it is being mounted to. Tubeless Tires have to be sealed onto the rim of the wheel to create an air-tight seal. Tubed Tires do not have this capability firstly because their bead is too slim and their is no facility on the wheel rim for the Tubed Tire to mount and create an air-tight seal. Generally, Tubed Tyres are used with a spoked wheel except BMW spoked wheels. So, you have to have the tube in place to create the air seal.
Why all bikes don't have tubeless tire?
it all depends on the type of rim if the rim (or wheel) is spoked it cant take a tubeless tire because the air would leak out at each spoke. whee as if it has a mag wheel (solid one piece wheel) there is no way for the air to escape so there for you can use a tubeless tire. I hope my answer helped you.
If you replace your cars tire from 145mm widewith tube to 185 mm widetube lesswhat will effect milage of the car?
ANSWER: Therewould be only a neglagible reduction in mileage because of the increased friction of the wider tire. You will need to make sure that a tubeless tire can be safely fit on your particular rim. Some require tubes, some accept tubeless tires
can you use a tube in a tubeless ready bycicle tire?
Yes, you can use a tube in a tubeless-ready bicycle tire, although it may not provide the same benefits as a tubeless setup. A tubeless-ready tire is designed to run without an inner tube, creating a seal against the rim that holds the air in place. When used with a tube, the tire will function in much the same way as a traditional tire and tube setup, but it may not provide the same level of puncture protection or weight savings as a true tubeless setup. Additionally, some tubeless-ready tires may not be compatible with certain types of tubes, so it's important to check the manufacturer's specifications before using a tube in a tubeless-ready tire.
Will a 245 tire fit a 9.5 rim?
Ys, as long as rim and tire diameter are compatible
Can 14 tire fits 15 rim?
no, it takes a 15' tire to fit a 15" rim.
Will a 17 tire fit a 16 rim?
NO. The tire is an inch bigger around than the rim....
How do you change a front tire on a Honda shadow 750?
Tire Changing The rim of the alloy wheel is aluminum and the exterior appearance can easily be damaged. Special care must be taken with the tire irons when changing a tire to avoid scratches and gouges to the outer rim surface. Insert scraps of leather between the tire iron and the rim to protect the rim from gouges. Honda offers rim protectors (part number 07772-0020200) for this purpose that are very handy to use. All models are factory equipped with tubeless tires and wheels designed specifically for use with tubeless tires. Warning: Do not install tubeless tires on wheels designed for use only with tube type tires. Personal injury and tire failure may result from tire deflation while riding. Wheels for use with tubeless tires are so marked. REMOVAL: 1. Remove valve core to deflate the tire. 2. Press the entire bead on both sides of the tire into the center of the rim. Lubricate the beads with soapy water. 3. Insert the tire iron under the bead next to the valve. Force the bead on the opposite side of the tire into the center of the rim and pry the bead over the rim with the tire iron. 4. Insert a second tire next to the first to hold the bead over the rim. Then work around the tire with the first tire iron, prying the bead over the rim. 5. Stand the tire upright. Insert the tire iron between the second bead and the side of the rim that the first bead was pryed over. Force the bead on the opposite side from the tire iron into the center of the rim. Pry the second bead off the rim, working around as with the first. 6. Honda recommends that the tire valve stem be replaced whenever the tire is removed from the wheel.
