Want this question answered?
Gland is used for the prevent leakage of oil from the gland box which is made up of copper or brass and gland box function is to support the glands which are made up of cast iron.This is called oil gland. steam gland is used for prevent the leakage of steam which exhausts air and which helps build up the vaccum in condenser is called steam gland.
It is important to maintain a vacuum in a condenser if you want it to work well.
A kenotometer is an instrument used in steam turbine condensers to measure the vacuum in the steam space of the condenser. The vacuum achieved by the condenser has significant influence on the efficiency of the steam turbine.
heat losses in condenser in percentage
gland steam temp should be nearer to less than turbine lub. oil flash point.
Gland staem condenser is meant for condensing the steam whichwas used for sealing the LABYRINTH GLAND and reusing it d cycle. It is then passed through d drain cooler and LP heaters and so on......
gland condenser is a type of condenser in which steam which is coming from d turbine is used for the heating of demineralised water and then this water is sent to the boiler so boiling of hot water consumes less coal and thus we get benifit of it
Gland steam is steam supplied to the labyrinth glands of the low pressure turbine to prevent air entering in the exhaust side, which disturbs the vacuum (± 50 mbar absolute) in the condenser. Gland steam pressure is to supply at about 0,2 bar.
Gland steam is steam supplied to the labyrinth glands of the low pressure turbine to prevent air entering in the exhaust side, which disturbs the vacuum (± 50 mbar absolute) in the condenser. Gland steam pressure is to supply at about 0,2 bar.
Gland steam always send from bottom because if we send the gland steam from top then it has a tendency to pass directly to the bottom (condenser) .Due to this reason gland steam is send from bottom so that it occupies total turbine inside vacuum space and seal it.
Gland is used for the prevent leakage of oil from the gland box which is made up of copper or brass and gland box function is to support the glands which are made up of cast iron.This is called oil gland. steam gland is used for prevent the leakage of steam which exhausts air and which helps build up the vaccum in condenser is called steam gland.
gland steam cooler is used to cool steam of gland sealing comes from turbine
It is important to maintain a vacuum in a condenser if you want it to work well.
A kenotometer is an instrument used in steam turbine condensers to measure the vacuum in the steam space of the condenser. The vacuum achieved by the condenser has significant influence on the efficiency of the steam turbine.
condenser or membrane
Steam generates electricity by spinning turbines located within electromagnetic fields. The steam can be generated by heating water using many types of fuels, such as coal, gas, and oil, or through the heat generated from controlled nuclear reactions.
This is to cool the steam turbine condenser, where the steam outlet from the turbine's last stage is condensed before returning to the boiler feed pump inlets. The cooling towers circulate water that passes through tubes inside the condenser, separate from the steam/water in the boilers.