Want this question answered?
take it to the dealer
Before replacing the headlight bulbs on a 1997 Acura CL prop the hood open. Locate the headlight housing and remove the old bulbs. Install the new lights.
I just changed both 2000 headlight bulbs. Locate the clips on the side of the assembly and pull up. Assembly is now loose and ready for you to install the new bulbs. Reverse to install.
To replace a headlight on a 2002 Honda Civic first prop the hood open. Locate the headlight housing inside the engine compartment. Find the bulbs and remove them. Install the new bulbs.
To replace the headlight bulb in a 1994 Nissan Sentra first prop the hood of the car. Locate the headlights and remove the bulbs from the housing. Install the new bulbs.
There is 2 large plastic screws that hold the headlight assembly`s in. Simply unscrew them and lift the headlight assemblies out then unhook take the bulbs out.
H6M If you are looking for a super bright light to install check out the PIAA bulb.
rectangular, tapering in n up towards hood. its holds 2 bulbs
I have vintage headlights converted to h4 halogen bulbs, my 30 amp fuse blows when i hit high beam, i was told to install a relay, hoe do i do this??
You will see a plastic cover in front of the radiator. It is held in place by a velcro strip. Lift this cover and you will find the high and low beam bulbs on the rear of the headlamps. Twist and pull to remove them and then unplug the wiring harness. Re-install new bulbs in the reverse order
Its held in with 4 star shaped screws... just disconnect the headlight bulbs, remove the screws and install the same way that you took that out with.
two bolts on the top of the plastic housing - lift the plastic headlight out and unscrew the headlight from the bottom of the light- replace the bulb and be sure to get the plastic pins in the right spot before you bolt the headlight back in place.