0
What else can I help you with?
What wattage dimmer switch should you use?
Remember that dimmers are for incandescent lights only unless you invest BIG BUCKS on dimmable fluorescent lights and fluorescent dimmers. Make sure that the switch that you replace with the dimmer does not control a plug-in outlet unless it is a lamp. You could do harm to an appliance not designed for such use. Otherwise,just add up the wattage of all the bulbs on the dimmer and buy one of the next size rating. So if you have two 60 watt bulbs, two 75 watt bulbs-- that's 270 watts total.Find a dimmer rated for 300 watts or more.
How do you make a circuit with 3 bulbs 2 switches and and 2 batteries where the 1st switch controls the lighting of all the bulbs and the 2nd switch controls the lighting of the second bulb?
Connect the two batteries for the voltage needed. If they are 12 volt batteries and the lights are 12 volts, connect the batteries in parallel (negative to negative and positive to positive). If they are 12 volt batteries and the lights are 24 volts, connect the batteries in series (negative of one battery to positive of the other). Run a wire from batteries to first switch, then to two of the lights and the other switch (in parallel). From the second switch run a wire to the third light, then connect all three lights back to the battery.
Why are two bulbs in a series dim?
Two bulbs in a series are dim because the resistance in the circuit increases when the bulbs are connected in series, dividing the voltage between them. This results in less power being supplied to each bulb, making them appear dimmer compared to when they are connected in parallel.
Why are some bulbs dimmer than others?
Bulbs can be dimmer than others due to differences in wattage, age, or type of bulb. Lower wattage bulbs will produce less light output, while older bulbs may lose brightness over time. Different types of bulbs, such as incandescent, LED, or CFL, also have varying levels of brightness.
Why are two bulbs in series with d-cell dim?
They Are Dim Because the d-cell being used does not produce enough energy to light them both
When two light bulbs are connected in series the?
When two light bulbs are connected in series , there is voltage drop which causes the second lamp to dimAnswerWhen two lamps are connected in series, neither lamp will be subject to its rated voltage and, so, each lamp will be dim. Surprisingly, perhaps, the lamp with the higher power will be dimmer than the lamp with the lower power!
Is a circuit that has two light bulbs and one battery less bright than a circuit that has two batteries and two light bulbs?
because one battery distributes an even amount of power. the only way that both of the light bulbs with two batteries will stay the same brightness is if the batteries ans light bulbs are in a parallel circuit. then the power is distributed evenly between the light bulbs. If the lighbulbs are in a simple circuit then the first lightbulb (in a positive to negative direction) will be brighter because it uses up more energy before it can get to the second light.
Martin has a 3 bulb camping light that holds four batteries The camp light has a switch that will allow the light to operate one two or all three bulbs at the same time The batteries will last 6 h?
2
Why won't 94 Pontiac grand am low beams come on?
One of two things, either both bulbs are burned out (unlikely) or you have a bad dimmer switch. I think it's the one on the steering column.
What two elements are used to make car batteries?
Although many elements make up car batteries, the nickel and iron battery has dominated for decades.
How do you connect several 12 volt batteries to make 24 volt?
you only need two 12 volt batteries to make 24 volt. connect them in series
How does the brightness of the bulbs in the two circuits compare?
ANSWERwhen two bulb are connected in series their will not be any changeANSWERWhat other bulbs? This question doesn't make sense.Perhaps you are thinking of this: with two bulbs in series, each bulb only gets 1/2 of the energy (or voltage) that a battery makes available, so each bulb is much dimmer than just one bulb attached to the battery would be.
