Yes
Use Dexron III or IV ATF. IV is synthetic ATF
Yes, ATF 4 can be used with ATF 3. THe only exception is do not use ATF 3 in a vehicle that requires ATF 4.
Yes you can mix the two, make sure you use a stainless steel spoon though.
Yes. ATF 4 replaces ATF 3. It is a full synthetic fluid which replaces ATF 2 and 3 in all specs. They can be mixed
Not recomended.
Multiply psi by 144 to get psf.
Yes it can but remember not to mix oils
For steel siding with 1" deep corrugations at 4" o.c. approx. siding weight would be: 24 Ga. 1.36 PSF 22 Ga. 1.72 PSF 20 Ga. 2.05 PSF 18 Ga. 2.70 PSF
It is typically okay to use synthetic ATF to top off a transmission originally filled with conventional ATF, or to replace conventional ATF in a transmission. However, you should always check with the manufacturer of the synthetic ATF you want to use if it is compatible with conventional fluids, and if it meets the requirements for your application.
The density of particleboard is 46 pounds per cubic foot, or about 2.88 pounds per square foot (psf) for 3/4" material. As a rule of thumb, figure 1 pound per square foot for every 1/4" of thickness (1.5 psf for 3/8" thick, 2 psf for 1/2", 2.5 psf for 5/8", 3 psf for 3/4", etc).
GARDOHEVT Xq 123 OMPS PSF FINITO