Yes. You can put it in horizontal position. Provided all other precautions are fallowed and it carries the electric current to earth.
<<>>
No, in North America a piece of pipe can not be used as a ground rod. An approved ground rod of 5/8" x 10 feet is what is required. If rocks are encountered and the rod can not be driven into the ground, the rod is substituted by a ground plate. Ground plates are becoming more popular as a backhoe can dig the hole for them in rocky soil. The ground plates also have the advantage of having a larger per square inch surface area than that of the required two ten foot ground rods.
beacause resistance is depend upon area
semi solid , rocky , and very hot layer
Rocky mountain
In general, the difference in horizontal pressure in the area.
A large tall rocky area of land that protrudes from the earth's surface is a mountain. Mountains are formed by the bending and buckling of the rock under the land.
How earthing is made in dry soil and rocky area using copper spike.
beacause resistance is depend upon area
Position your cursor on a blank area of the tool bar. Left click and hold, drag to the bottom of the screen.
its just nice and rocky
The area of Rocky Islets National Park is 3,200,000.0 square meters.
The mesh size in the earthing design for substation can be various size depend on the area. For area that does not contain equipment, we could increase the mesh size because there is no equipment to cause touch potential. But if the area is at the corner of the substation, the mesh size should be smaller because to limit the step potential.
it is in the rocky mountains area
semi solid , rocky , and very hot layer
Plot area
The Rocky Mountain's area is 8,256 acres.
The area of Fred Gannon Rocky Bayou State Park is 1,444,727.7427968 square meters.
If this is a horizontal area, it must be its height.