Yes, since it was built with that when new.
Yes, since it was built with that when new.
Yes, since it was built with that when new.
No, unless the a/c has been converted to r134a
2.0 pounds of R134a freon............
It was built with R12, can be coverted to R134a
The solenoid is attached to the starter. Replace the starter.
the alternator is right in the front behind the right side of the rad
It does not have a cabin filter.It does not have a cabin filter.
The firing order should be 1-2-3-4-5-6.
Nippondenso ER/IF 120 Amp, 12 Volt, CW, 6-Groove Pulley Used On (2001-98) Chrysler Concorde 2.7L(2001-98) Dodge Intrepid 2.7L Mitsubishi ER/IF 130 Amp, 12 Volt, CW, 6-Groove Pulley Used On (2001-99) Chrysler 300, LHS 3.5L(2001-98) Chrysler Concorde 3.2L(2001-98) Dodge Intrepid 3.2L(2001-00) Dodge Intrepid 3.5L Nippondenso ER/IF 90 Amp, 12 Volt, CW, 6-Groove Pulley Used On (1996-93) Chrysler Concorde 3.3L(1997-93) Chrysler Concorde, LHS 3.5L(1996-94) Chrysler New Yorker 3.5L(1997-93) Dodge Intrepid 3.3L, 3.5L(1997-93) Eagle Vision 3.3L, 3.5L(1997) Plymouth Prowler
i just connected my ac belt and there was a black wire that was disconnected from the battery and i attached it back to the battery
A 1993 Intrepid does not have a distributor cap.A 1993 Intrepid does not have a distributor cap.
No. The 93-97 LH cars equipped with the 3.5l V6 are not. However, 98 and up are interference.
Remove the radiator cover the connects to the frame. These are connected by 4 bolts.Unplug the radiator fan.Remove the top two clips that hold the radiator to the fan.Remove the bolts on the sides of the fan.An instructional video explaining how to remove a radiator fan from a 93-97 Dodge Intrepid has been included below.