A 1993 Intrepid does not have a distributor cap.
A 1993 Intrepid does not have a distributor cap.
A 1993 Intrepid does not have a distributor cap.
The 93 Beretta does not have a distributor, it has coil packs.
The marked # 1 position on the distributor cap faces towards the firewall
You can't. They have a distributor pack, and not a cap and rotor. a 1.6 eng 93 geo storm has a distributor cap and rotor!!!
Clockwise
Nippondenso ER/IF 120 Amp, 12 Volt, CW, 6-Groove Pulley Used On (2001-98) Chrysler Concorde 2.7L(2001-98) Dodge Intrepid 2.7L Mitsubishi ER/IF 130 Amp, 12 Volt, CW, 6-Groove Pulley Used On (2001-99) Chrysler 300, LHS 3.5L(2001-98) Chrysler Concorde 3.2L(2001-98) Dodge Intrepid 3.2L(2001-00) Dodge Intrepid 3.5L Nippondenso ER/IF 90 Amp, 12 Volt, CW, 6-Groove Pulley Used On (1996-93) Chrysler Concorde 3.3L(1997-93) Chrysler Concorde, LHS 3.5L(1996-94) Chrysler New Yorker 3.5L(1997-93) Dodge Intrepid 3.3L, 3.5L(1997-93) Eagle Vision 3.3L, 3.5L(1997) Plymouth Prowler
inside distributor under cap (expensive) Honda calls it an ignitor its part of the distributor actually it is the distributor
Unplug the wires going into the distributor cap, be sure you know which wire goes to which terminal or your car will not start if they are wrong. Remove the 3 bolts that hold the plastic cap to the metal distributor. Put the new cap back on, replace the bolts, and plug the wires into the appropriate terminal.
Follow the plug wires back to the distributor cap. On my 93 DX it is on the drivers side of the engine block underneath the air intake assembly.
on the distributor under the cap with two female connectors in it.
The 3.0 L - V6 engine has a distributor cap on the 1993 Ford Ranger The 4 cylinder and 4.0 L - V6 engines are EDIS ( electronic distributorless ignition system )
on the left side below the distributor cap its only one bolt.
18436572..firing order.......starting on the front drivers side of the distributor...thats the firing order for any small block v8 chev...