To install sheet vinyl flooring one needs to first remove all current flooring and the doors. Install the underlay material, cut the sheet vinyl to fit the shape of one's room, cover the underlay in adhesive and press the vinyl into place.
There are a few kinds of sheet vinyl. Most glues will come off most vinyl if you can get hold of an edge and simply peel it off.
It's usually available where they sell sheet vinyl (or lino). Some selections are available in Rona and Home Depot as well. -Any Mapei vinyl adhesive would work on sheet vinyl, and they are very good adhesives.
no
Since sheet rock is already manufactured, there is nothing to "put in" it. To soundproof on interior walls the best solution is to add insulation between the stud walls--usually rolled insulation works best, is relatively cheap and will not shrink the room size.
Installing vinyl flooring is hard if does not get tips and step-by-step instructions to help with installing vinyl sheet flooring.
Yes, you can
Interior sheet rock walls are normally 4-1/2" thick.
Well first of all there is no such thing as a fiberglass pool. You can have fiberglass walls instead of steel but your pool is still vinyl because you need a liner. These are the usual combinations of inground pools. Sand floor, steel walls, vinyl liner Sand floor, fiberglass walls, vinyl liner Vermiculite floor, steel walls, vinyl liner Vermiculite floor, fiberglass walls, vinyl liner Concrete floor, steel walls, vinyl liner Concrete floor, fiberglass walls, vinyl liner Concrete floor, concrete walls, no liner Concrete pools have to be painted with epoxy paint or if you want tile installed then usually you plaster over the concrete. Now a days 3 and 4 are the most common inground installs. 1 and 2 are usually pools that are 30 + years old although you can still have them done that way. In South Alabama the cost of a 20 *40 vinyl pool will cost around 18 to 22 thousand
yes.
yes - of course
Wood grain vinyl adhesive backed sheet is sold as shelf covering. You could try this? /Brian W