1. Yes, you can remove a floppy drive.
2. Yes, Windows 95 supports USB (only certain versions, actually).
3. No, you cannot connect a USB hub to the floppy controller.
A DRIVE
Hard Drive:Possibly because your filesystem is broken or corrupt. TO FIX: MUST HAVE WINDOWS INSTALL DISK/RESTORE, THEN REINSTALL, MUST HAVE ACTIVATION KEY FOR REINSTALL! CD/DVD DRIVE: WORN OUT DISC, BROKEN CD/DVD PLAYER, CORRUPT/BROKEN OR NO FILESYSTEM, NO FILESYSTEM AS IN YOU NEED TO FORMAT THE DISC OR REPLACE YOUR CD/DVD DRIVE OR REPLUG IDE PLUG. FLOPPY DISK:NO FLOPPY IN DRIVE, BROKEN/DAMAGED DRIVE, CORRUPT OR UNFORMATTED DISK, UNPLUGGED IDE ON MOTHERBOARD. FIX: FORMAT FLOPPY, REPLACE FLOPPY DRIVE, PUT FLOPPY IN DRIVE. Disk read error is because your Harddisk's/CD/DVD drive/Floppy Drive is broken, corrupt, missing, unformatted or unplugged.
Answer IS:-Windows.... Regards PM
Normally, the floppy drive light comes on so the computer can tell if there is a boot disk in there. If there is a floppy in the drive that is not a boot disk the windows will stop loading until the floppy is removed.
Most modern laptops do not have space for a floppy drive internally, so this is impossible on them. If you have an old laptop that has space for a floppy drive internally, it probably already has one so you don't need to install one. However if that existing internal floppy drive has failed you will have to replace it (assuming you can find a floppy drive to replace it with). To replace the existing internal floppy drive you will need the manufacturer's documents on how to open the laptop's case, get access to the floppy drive, and swap out the old one and replace it with the new one. This will almost certainly require special tools (e.g. torx drivers, wrenches) that you don't already have and will need to buy if you don't already frequently do such work.
The floppy disk has nothing to do with the operating system on the hard drive. You can use a floppy disk created in Windows XP to boot a computer that has Windows 2000, Windows 98, Windows 95, Windows 3.1, Windows Vista, Windows 7, Linux, Solaris, FreeBSD, etc...
Under Windows, a floppy drive is always formatted using the FAT 12 file system.
Hard Drive:Possibly because your filesystem is broken or corrupt. TO FIX: MUST HAVE WINDOWS INSTALL DISK/RESTORE, THEN REINSTALL, MUST HAVE ACTIVATION KEY FOR REINSTALL! CD/DVD DRIVE: WORN OUT DISC, BROKEN CD/DVD PLAYER, CORRUPT/BROKEN OR NO FILESYSTEM, NO FILESYSTEM AS IN YOU NEED TO FORMAT THE DISC OR REPLACE YOUR CD/DVD DRIVE OR REPLUG IDE PLUG. FLOPPY DISK:NO FLOPPY IN DRIVE, BROKEN/DAMAGED DRIVE, CORRUPT OR UNFORMATTED DISK, UNPLUGGED IDE ON MOTHERBOARD. FIX: FORMAT FLOPPY, REPLACE FLOPPY DRIVE, PUT FLOPPY IN DRIVE. Disk read error is because your Harddisk's/CD/DVD drive/Floppy Drive is broken, corrupt, missing, unformatted or unplugged.
In Windows, Drive C: is the first hard drive.On the PC compatibles (DOS then Windows, which was a program running under DOS), drive A: was reserved for the first floppy disk drive and B: for the second floppy disk drive. Drive C: was reserved for the first hard drive.Many computers don't even have floppy drives anymore, but the first hard drive is still labeled C:
Because floppy drives (like CD-ROM drives) are very inexpensive. It will cost you $10 at the high end for a brand new floppy drive, just asking a technician to look at your floppy drive could cost more than that.
The floppy disc drive was invented at IBM in 1967. It used 8" floppy discs. The first floppy disc drive in an IBM personal computer appeared in 1981. By this time the original 8" floppy disc had been replace by a 5.25" disc.
floppy farst boot drive and install window