0
?
What else can I help you with?
Can 32 watt t12 fluorescent lamps be used where a 40 watt t12 fluorescent lamp was used?
Yes, you can use a 32 watt T12 fluorescent lamp in a fixture that previously housed a 40 watt T12 fluorescent lamp. However, the light output will be slightly lower. It's advisable to check the fixture's compatibility with the lower wattage lamp to ensure proper performance.
Can you use 40 watt in a fluorescent light in place of a 32?
Yes, the wattage is just the power consumption. A 30 watt Fluorescent will give more or less the same light as a incandescent bulb or 60 watts, which is the limit for your fixture for incandescent bulbs.
Can you use a 36 watt fuse for a 40 watt fluorescent bulb?
Fuses are not rated in wattage, they are rated in amperage and voltage.
How many amps do 8 40 watt fluorescent lights take?
It depends on the voltage and whether the lamps are actually 40 watts or 40 watt equivalent. Watts / volts = amps
How many fluorescent tubes equal 1000 watt metal halide light?
It would depend on the wattage of the fluorescent tubes. As a rough estimate, you would need about 6-8 standard 40-watt fluorescent tubes to approximate the light output of a 1000-watt metal halide bulb.
How much money does 40 watt 4ft fluorescent tube use a year?
To calculate the annual cost of running a 40-watt 4ft fluorescent tube, you need to know the cost of electricity per kilowatt-hour in your area. Usually, a 40-watt fluorescent tube is on for about 8 hours per day, so you would multiply the wattage (40) by the hours/day (8) to get watt-hours per day. Convert that to kilowatt-hours and then multiply by the number of days the light is on per year. Finally, multiply that by the cost per kilowatt-hour to get the annual cost.
What parameters you consider when you calculate the current consumption of a 40 watt fluorescent bulb?
voltage, current and power factor
Can i use a 36 watt electronic starter to power a 40 watt fluorescent tube?
Yes, you can use a 36-watt electronic starter with a 40-watt fluorescent tube, as electronic starters are designed to work with a range of wattages. However, the performance may vary, and the tube might not operate optimally. It's always best to check the manufacturer's specifications to ensure compatibility and avoid potential issues.
Can you replace a 1500 watt element with a 2000 watt element in a 40 gallon water heater?
Yes you can.
How do the types of light bulbs compare?
The main types are: Incandescent 10 lumens per watt Halogen 13 lumens per watt Fluorescent 40-50 lumens per watt LED 40-60 lumens per watt Lumens measures the brightness, watts measures the electric power used.
How many 40-watt fluorescent lights can produce 1000 lux?
To achieve 1000 lux, you would need approximately 6-7 40-watt fluorescent lights per square meter. Lux is a measure of illuminance, so the number of lights required can vary depending on factors such as the height of the lights and the reflectivity of the surfaces in the room.
Which light wastes more energy 40 watt candelabra or 60 watt energy saving fluorescent?
It is not a waste of money if you need the light but that being said, the higher the wattage usually reflects in a higher cost to the consumer. To answer this question the voltage and current of each device should be stated so that calculations could be made. An energy saving fluorescent is driven by an internal ballast and it is the ballast input current that is needed.
