0
Can you replace a c6 transmission with a c4 without making any changes to the vehicle?
Wiki User
∙ 11y ago
No, mount is different, driveshaft will need to be lenghtened, yoke on the front of the driveshaft will need modified. The shifter may or may not need changed depending if it is stock or aftermarket, cooler lines rebent, convertor replaced or use aftermarket adapter.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
Can you drive a vehicle without a working transmission?
Of course not. Without a working transmission you are going nowhere.
What is the cost to replace a rear main seal on a rear wheel drive vehicle?
it entirely depends on what type of vehicle it is, what type of transmission is in it, the age of the vehicle and if the rear main seal is part of the oil pan gasket. Impossible to answer without vehicle informations.
Can you replace torque converter without the transmission?
Yes
What is the oldest motor you can put in a 2002 f150 with out changes?
With the 4.6 liter Triton, 2001, so long as the donor vehicle has the same transmission. With the 5.4 Triton, 1997, and you'll have the same constraints. This is assuming that, when you mean "without changes", you include reflashing the ECM in those changes.
How do you replace the transmission on a 1994 Chevy Camaro?
The best way to start is to buy a repair manual for the vehicle. In this amnual there will be a section on the transmission. There will be a remove and replace sub-section and this will list all the procedures ofr performing the remove and replacement of your transmission. The manual costs range from 15 to 25 dollars. Without this amnual you will not know very important information needed for the correct procedures for doing the transmission replcement.
Is it safe to operate your vechile without a dip stick in the transmission?
It is safe to operate your vehicle without a dip stick in the transmission. The dip stick is mainly used to test the level of fluid in the transmission.
Can you start a car without a battery?
Generally, staring a vehicle with its battery is a quick and easy process. However, without the battery, you WILL NOT be able to start-up that engine, UNLESS, it is fully MANUAL TRANSMISSION ENGINE i.e " a gear shift vehicle. " Automatic transmission " vehicle WILL NOT be able to start without a battery. Now we know that Automatic transmission vehicle will not be able to start without it battery. Here is a very easy, but hard process to start a manual transmission vehicle that does not have a battery; " you will need to " PUSH_START " your vehicle in preferably 2nd gear, in order to the engine to fire up ". Side notes : If you were to turn off your engine or vehicle after it got started, you will have to PUSH_START it again.-Am not a vehicle mechanic, so if you need professional help, asked a mechanic : ). hope it helps.
How do you replace the clutch on a 1995 ford ranger XL with 5 speed manual transmission?
If your asking if it can be done without removing the transmission? NO.
Is there a way to replace the shiftrod seal in a 1990 Ford Probe with a 5-speed transmission without pulling out the entire transmission?
i think you can replace the seal by removing the rubber shift boot
Is it easiest to replace the engine on a 1992 Acura Vigor 2.5 automatic with or without removing the transmission at the same time?
You are better taking off the engine with the transmission together, I have a 93' Vigor and changed the transmission and it pretty hard, there many bolts that are hard to get; if you need to changed your engine, it will be much easier taking the transmission off while the engine is off the vehicle..
Can I replace flexplate without dropping transmission 99 Honda Accord?
No. The flex plate is on the transmission input shaft between engine and transmission. To get it out you have to pull the transmission. Fortunately, it's not hard to do.
How do you replace slave cylinder tube without removing transmission?
It depends on where the slave cylinder is located. If it is inside the bell housing you will have to remove the transmission.
