If it is a plastic radiator and it is stripped, no, if it is metal yes.
To change the thermostat on a 2001 Pontiac Montana Minivan, first, ensure the engine is cool and disconnect the battery. Then, locate the thermostat housing, which is typically near the engine's upper radiator hose. Remove the hose and the housing bolts, take out the old thermostat, and replace it with a new one, ensuring the gasket is properly seated. Reassemble everything, reconnect the battery, and refill the coolant as necessary.
Drain the water from the radiator. Remove the water hoses. Remove the retaining bolts. Reverse the process to install the new radiator.
To replace the radiator in a 2003 Pontiac Montana, first, ensure the engine is cool and disconnect the negative battery cable. Drain the coolant by removing the drain plug at the bottom of the radiator and detach the hoses connected to it. Remove the mounting bolts holding the radiator in place, lift it out, and install the new radiator by reversing the disassembly steps. Finally, refill the cooling system with the appropriate coolant and check for leaks.
To remove the radiator from a 2001 Pontiac Montana, begin by disconnecting the negative battery cable and draining the coolant from the radiator. Next, remove the radiator hoses and any electrical connections. Unscrew the mounting bolts that secure the radiator and carefully lift it out of the engine bay. Be sure to replace any gaskets or seals during reinstallation.
To replace a radiator in a Pontiac Montana, first ensure the engine is cool, then disconnect the negative battery cable. Drain the coolant by removing the drain plug at the bottom of the radiator, and disconnect the hoses and any electrical connectors. Remove the mounting bolts and lift the radiator out, then install the new radiator by reversing the process—secure it with the bolts, reconnect hoses and electrical connections, and refill the coolant. Finally, check for leaks and ensure the system is functioning properly.
To replace the brake light on a 2000 Pontiac Montana open the trunk to reveal the housing units. Find the lights and pull the bulbs out. Replace the units.
it is a 2001 Pontiac Montana that has broken three bealts so far I need to know what pully I will need to replace?
with explosives
Depending with the experience and the expertise of the mechanic. it may take up to 1 hour to replace 2006 Pontiac L Montana.
It's an automatic, there is no clutch.
One at a time
How much does it cost to replace a radiator in a 2002 Pontiac Grand Am