In order to change the brake light, check your manual for directions. You will need to remove the cover and replace the burnt out bulb.
The brake light fuses can be found in the fuse box. The brake light fuse will be in the second column, fourth from the top.
To replace the rear brake light on a 2002 Pontiac Bonneville, first, open the trunk and locate the tail light assembly. Remove the screws or clips securing the assembly and gently pull it out. Disconnect the electrical connector, then twist the bulb socket counterclockwise to remove it. Replace the old bulb with a new one, reassemble the components, and test the brake light to ensure it works properly.
The 1997 Pontiac brake light fuse is located in the fuse box. The brake light fuse will be labeled as the tail light fuse.
my brake light stay on but emergency brake is unhooked
how to replace map light bulb in a 2006 pontiac torrent
To replace the brake light on a 2000 Ford Explorer, remove the screws holding the brake light in place. Gently, but firmly, pull the brake light out of the vehicle and replace with a new one.
How to replace a brake light on a nissan Tiida hatch back.
To replace the fog light bulb on a 2003 Pontiac Montana, first, ensure the vehicle is turned off and the keys are removed. Access the fog light assembly by turning the fog light cover counterclockwise to remove it. Disconnect the wiring harness from the bulb and remove the old bulb by twisting it counterclockwise. Insert the new bulb, reconnect the wiring harness, and reattach the fog light cover by turning it clockwise.
is your e-brake on?
there is a switch up under the brake pedal
To replace your brake light, you need to unscrew the brake cover from the inside of the trunk. Then you will be able to pull the old bulb out and replace it.