you have to get a AC delete pully most likely but might get lucky trying differet lengths. but I'm not shure on the physics that is all involved with tension on the crank in diff directions if you remove pull too one side might cause problems if you just use a shorter belt like bearing wear
Go for it
Drivers side under AC compressor
You will need to check the condenser for leaks, also check the air compressor, you can check the air compressor by turning on the ac, look and see if the front of the air compressor is turning. If the air compressor is not coming on you will need to replace it.You can also check your 134a level. hope this helps.
You will ned to specify as to what year.
call your local garage.
In most cases you will need to replace the turn signal switch on the steering wheel for your 1983 Chevy Caprice Classic rather than fixing it. To replace it, remove the horn pad and then use a steering wheel puller and compressor to remove the steering column. You will then remove the signal along with the wiring harness and bus fuses. Replace the signal and wiring and then replace the steering column itself.
How do I replace turn signal on a 1992 Chevrolet caprice classic I want to learn how to do it myself
Remove the air conditioning hoses from your 1997 Chevy Malibu air conditioning compressor. Remove the compressor belt. Remove the compressor retaining bolts. Reverse the process to install your new air conditioning compressor.
One of the easiest but to do it right , get a manual on your car.
Not without modification
No
Not without major modifications.