Want this question answered?
What is your question? A standard outlet is 110V. A 220 outlet is shaped different so that you know it is 220. You would never run 220 through a 110 outlet.
You would have to run new wires to obtain 240 volts or use a step-up transformer.
This is a voltage drop question. To answer this question an amperage is needed.
No a 230 volt appliance should not be pluuged into a 110 volt socket (And vice versa) you need to buy a converter that can be plugged into the 110 volt outlet then the appliance can be plugged into the converter.
Yes. They're essentially the same as 110-115-120 are the same. The power that comes into your house is 240V, but by the time it's transferred through wires and breakers and outlets, it drops to about 220-230V. So anything between 220-230-and-240 is the same thing.
What is your question? A standard outlet is 110V. A 220 outlet is shaped different so that you know it is 220. You would never run 220 through a 110 outlet.
A 1,000 watt inverter giving 110 volts is rated at 9 amps.
A 1450 watt coffee maker will use around 13 amps at 110 volts.
You probably mean to change it to a 240 V outlet... either case, you'll need to run a new wire and install a new breaker.
It depends on the application, but for Single-Phase dwelling service and feeders 3 AWG copper is good for 110 amps. That really equates to 100 amps since you can't get a 110 amp circuit breaker.
You would have to run new wires to obtain 240 volts or use a step-up transformer.
No. Car stereos run on 12v DC power. A wall outlet, depending on where in the world you are, gives out either 110-120 or 220-240v AC power.
110 v 5.5 amps is 605 watts. If it is transformed, the power in watts stays the same (in principle), so the 220 system would run at 2.75 amps.
Because of voltage drop, 4 awg copper would be recommended for that distance run. <<>> A #1 copper conductor will limit the voltage drop to 3% or less when supplying 50 amps for 200 feet on a 110 volt system.
This is a voltage drop question. To answer this question an amperage is needed.
No a 230 volt appliance should not be pluuged into a 110 volt socket (And vice versa) you need to buy a converter that can be plugged into the 110 volt outlet then the appliance can be plugged into the converter.
Yes. They're essentially the same as 110-115-120 are the same. The power that comes into your house is 240V, but by the time it's transferred through wires and breakers and outlets, it drops to about 220-230V. So anything between 220-230-and-240 is the same thing.