Apparently yes, although I have not tried it. Guide is located here,
http://www.rockcharger.com/tech/timing.html
You can set the base timing by ear good enough to get it running. But you will have to have a engine scanner to set the timing correctly. The timing is controled by the PCM. POWER TRAIN CONTROLL MODULE.
what timing are you trying to set? the cam timing or the ignition timing?
That requires an engine scanner to set the timing.
Ignition timing is automatically set. sorry.
Ignition timing or valve timing?
Ignition timing has no adjustment on these bikes.
Hoo I set the correct timing on a 1993 mazda protege
its set by the ecu
You can not set the igitniton timing yourself.You can check it but not set it.The timing is ran off a crankshaft sensor.Idle timing is 27 degrees
The ignition timing is probably controlled by the computer, and cannot be manually set. Check to see if it has a distributor, if it does it may be adjustable, if not, it is not adjustable.
To set the ignition timing on a Ford Probe GT 95 with an MX engine, remove the two 12 mm head bolts holding the distributor in place. Then rotate the distributor to set the ignition timing.
It requires an ENGINE SCANNER to set the ignition timing on that year of engine.