Want this question answered?
the amplifier is located under the center console. you have to take off the back cap, the storage compartment and locate all of the screws. You will see the amp under the metal frame. You have to unbolt that frame and move it in order to get to the amp. I just took mine out today.(not fun)
On the back of picture frame backings are hooks. when you get everything in the picture frame you just take your finger and move the hook under the frame.
a queen mattress is 60" wide by 80" long. you have to take into consideration the size of bed if not using bed and only metal frame then that's the dimensions
You can buy a double mattress for under 400 on beddingwarehouse.com.au
you gotta take all the metal off the car to bare frame get u a lizzard and put lizard urine and put it on the sponge and damp on the frame and put on frame and pour a gallon of vinager and the crank your car and your good.
The iPad is manufactured through a computer lathe process that starts with a larger piece of aluminum for the frame/back. There is no public information on the amount of metal wasted in this process.
if you look under the exhaust manifold there is a metal pipe that runs between the oil pan and the frame. the metal hose connects to the thermostat housing under the manifold. you must remove the exhaust manifold heat shield on the top of manifold to get to the 2 8mm bolts to remove the thermostat. make sure you take note of the direction of flow from the old thermostat.
What frame? what type of system? Normally all work on the inside of a door is done through the holes in the frame behind the panel, if the window is in your way disconnect it and pull it up and out of the way
Jack it up under the A frame on the side you are working on.
did you try looking at the front of the frame and seeing if the age is on the metal vin plate under your stearing head? other wise take the VIN to a dealer and they should figure it out. also upside down forks 88 and older, inverted 89 and newer. steel frame 96 and older, aluminum frame 97 and newer. that could atleast get you a base time period. also not if its liquid or air cooled.
yes metal is renewable. they take it back to factories and melt it down to liquid and than place it back into solid form which may be any shape. from a bed frame to the car door on your paddock bashed
because lightning atracts metal. so if lightning strikes your umbrella and you are touching the metal you may DIE.