Want this question answered?
mobil one
Well if the light is on there is something going on with the srs system. Most likely cause is the passengers seat sensor, the sensor under the leather.
Both
Try disconnecting the battery. Make sure you have the security code for your radio first.
These vehicles take a special mercedes benz rear wiper blade so since you have to go to the dealer to get the part, ask them for the procedure too.
Yes, this car does not accomodate anorexic people.
To remove the passenger side airbag on a 2003 Blazer, look inside the glove box for the bolts that must be undone, take these bolts out. You will also have to disconnect the vehicle's battery, and disconnect the wiring that goes to the airbag from underneath the dashboard. You will have to remove the front speaker and use a socket to remove the one screw that you see. The other screw can be found by removing the dashboard.
im not 100% on this but on the passenger side of the dashboard the is a storage bucket above the airbag. i think you can lift this out to get to the fuse box. im not 100% on this but on the passenger side of the dashboard the is a storage bucket above the airbag. i think you can lift this out to get to the fuse box.
it may be the airbag module. on the 2003, the module is located under the passenger seat. im not sure where it is on other years
around 40 pounds the sensor is broken
Code: 33 Passenger Air Bag Circuit Resistance High What year of Expedition ? if older model (I think 2002 or 2003 or older) is passenger side airbag circuit malfunctioned. if newer than 2002 or 2003 (Sorry not sure exact year they changed code), it means Driver side pretentionor (Seat belt retractor). There is small bomb in seat belt Retractor to make passenger tight fit to seat when airbag deploy. if something is wrong with seat belt retractor bomb (pretensionor), airbag itself may may not work to avoid injury by airbag.
When the Mini cooper 2003 airbag light is permanently on, then it needs to be reset.