Want this question answered?
Yes is ok as long as you increase the size of the plug .I use dryer plugs( 30 amp )all the time on equipment that came with smaller plugs (20 amp).
Generally, a 15 amp plug.
Yes. Assuming everything is wired correctly and your 30 amp AC cord is compatible with your 50 amp plug, you can do this. I think you will find, however, that your 50 amp plug has a different pin configuration than your 30 amp cord end. This is not easily resolved because there are serious dangers in going the other direction, plugging a 50 amp appliance into a 30 amp receptacle.
No, the amperage pin configurations are different between a 15 amp and a 30 amp plug.
Yes, the amp rating is a measurement of the highest amp load it should carry. So a 15 amp appliance will work on a 20 amp socket but you wouldn't want to use a 20 amp appliance on a 15 amp socket.
No difference in terms of number of wires used
Yes is ok as long as you increase the size of the plug .I use dryer plugs( 30 amp )all the time on equipment that came with smaller plugs (20 amp).
well you plug your sub into your amp you do have an amp write
Generally, a 15 amp plug.
There are many types of guitar effects and volume pedals. The cable from the guitar is plugged into the jack marked IN and another cable is plugged into the one labled OUT and then plugged into the Amplifier.
7.2kW shower = 32 Amp fuse = 6 mm2 cable size7.5kW shower = 40 Amp fuse = 10 mm2 cable size8.5kW shower = 40 Amp fuse = 10 mm2 cable size9.5kW shower = 40/45 Amp fuse = 10 mm2 cable size10.5kW shower = 45 Amp fuse = 16mm2 cable size
In many cases, yes. Many combo amps have an output jack, usually located on the back of the amp's head unit, that you can simply plug in to an external speaker cabinet. If your amp doesn't have such an output jack, it is still possible to plug it into an external speaker cab. Most combos are set-up like self-contained head and cabinet units. A Fender Twin Reverb, for example, has a cable in the back that attaches the head unit to the 212 speaker enclosure. If you have a cable like this, you can get an adapter so you can plug the cable attached to the head unit into a longer extension cable, which you can plug in to a larger cabinet. One thing you have to do is make sure your amp's head has enough power (watts) to properly power your half-stack cab. If it doesn't have enough power, the cab won't sound as good as you would like.
A wireless transmitter is the part the plugs into the guitar and a wireless receiver in the part that plugs into the amplifier.
A porter cable router is similar to a fixed amp router. A porter cable router follows the exact features of a regular router plus offers to additional connections on the laminated plug area.
2.5 sqmm cu cable current carrying capacity is 19 amps.
Yes, the larger cable can carry more load (current) than the other cable.
15 amp outlet on a 20 amp circuit.