0
What else can I help you with?
What happens if you use 8 volt plug on 5 volt?
You could burn out the device you're powering.
Can you use a 250 volt American appliance in India?
YES, Make sure to get adapter plug for India.
What wire to use for 4100r9w plug 250v 3p4w?
This plug is a pin and sleeve 250 volt three phase four wire device. It is rated at 100 amps. A #3 copper conductor with an insulation factor of 90 degrees C is rated at 130 amps.
Can you use 250 volt 1A for 230 volt 800mA?
no
Can you plug the norelco 905rx into 220 volt outlet?
No, the Norelco 905RX is designed for 110-120 volt outlets and should not be plugged into a 220 volt outlet as it may damage the device. It's recommended to use a voltage converter or transformer that is suitable for your particular device in order to safely use it with a 220 volt outlet.
How do you check the 120 volt plug on 1994 diesel club wagon?
Use a volt meter Plug a 120 volt accessory into it
What is the difference in 30 amp 250 volt and 30 amp 600 volt?
The main difference is their voltage ratings. The 30 amp 250 volt rating is suitable for lower voltage applications, while the 30 amp 600 volt rating is suitable for higher voltage applications. It's important to use the correct voltage rating to ensure safety and proper functioning of electrical equipment.
Can you use 140 volt in 240 volt plug?
Using a 140-volt appliance in a 240-volt plug is not safe and is not recommended. The appliance is likely to be damaged due to the higher voltage, potentially causing overheating or electrical failure. Always ensure that the voltage specifications of your appliances match the outlet voltage to avoid hazards. If you need to use a 140-volt device, consider using a step-down transformer designed for that purpose.
Can you plug a 250 volt lamp into US outlet?
Yes. If the plug (cap) end of the 250 volt lamp is compatible to the receptacle the lamp would work. The light output of the lamp would not be very bright. Because the working voltage is halved so would the light output.
You have 240v and you need to convert to 230v for an air compressor?
Yes, you can use a 230 volt device on a 240 volt supply.
Can you use 5.8 volt charger on 5.2 volt device?
It is generally not recommended to use a charger with a higher voltage than the device's specified input. Using a 5.8V charger on a 5.2V device may potentially damage the device or reduce its lifespan due to overvoltage. It is safer to use a charger that matches the device's recommended voltage input.
When you have 4x110 volt plug can you use 3x120 volt?
If you have a quadruple 110 v socket, it can be replaced by a triple 120 v socket.
