3 core 35 sq mm alu. Or 3 core 25 sq mm cup.
Need to know what the voltage of the motor is.
you need the current of motor or the KW/HP rating
No you can not it's 31 amps
Assuming it is a 400 V three-phase motor, the phase current is 11 amps, or more if the power factor is less than 1.0 (or the supply voltage is different). If it is a 400 V motor the cable should be capable of carrying 16 amps, so a 2.5 mm-sq 4-core cable is needed.
To answer this question the voltage of the motor must be stated.
3 core 35 sq mm alu. Or 3 core 25 sq mm cup.
Need to know what the voltage of the motor is.
you need the current of motor or the KW/HP rating
No you can not it's 31 amps
Typical motor and belt efficiencies: * Motor 1kW - 0.4 * Motor 10 kW - 0.87 * Motor 100 kW - 0.92 * Belt 1 kW - 0.78 * Belt 10 kW - 0.88 * Belt 100 kW - 0.93Depending on the motors input , we can measure the voltage consumed by a ceiling fan.Normally , household fans consume 200 - 400 watts of energy.hope this helps =)
Assuming it is a 400 V three-phase motor, the phase current is 11 amps, or more if the power factor is less than 1.0 (or the supply voltage is different). If it is a 400 V motor the cable should be capable of carrying 16 amps, so a 2.5 mm-sq 4-core cable is needed.
A 7.5 kW motor is equal to 9.916 horsepower.
The cable size depends on a few factors, such as the supply voltage, the method of starting the motor, (direct-on-line, or star delta) and the length of cable required to compensate for voltage drop. Also, if the cable is copper or aluminum.110 kW motor has a rated current of 200 amps at 415 volts, so the correct copper cable size would have a cross-sectional area of 75 square mm., if the motor is started direct-on-line.At 660 volts, the rated current would be 118 volts and the cable size would be 35 square mm.
starting current of 315 kw motor in start delta 2.5 time for single sec. if your cable lingth 130 meter u can use 150mm2 (3 cable per phase) 150mm2 single cable current 292 Amp voltage drop 0.28/meters so u can use breaker 1000 Amp and set Im time (for starting current) setting avalible in breaker.
22 kw motor how much takes ampares with load
Need to know the voltage of the motor.