It depends on what you are powering with the circuit, but probably not. The 1.5 amp fuse would blow in normal operation of the device.
No, the voltage rating should not be exceeded. However, you could use a 250v 10a fuse for a 125v 10a fuse.
No
Yes, fuses of a higher voltage can be used safely. What is not recommended is to use a lower voltage fuse on higher voltages.
It is always best to replace with equal or higher rating. However, there may be applications where it would be fine, such as a low voltage circuit.
Use the correct fuse and nothing else.
No, the voltage rating should not be exceeded. However, you could use a 250v 10a fuse for a 125v 10a fuse.
No
no.. it could damage your electrical components.
yes. the 250v just means that's the maximum voltage rating the fuse can handle .. so it can def handle 125v. just not vice versa.
Yes, fuses of a higher voltage can be used safely. What is not recommended is to use a lower voltage fuse on higher voltages.
It is always best to replace with equal or higher rating. However, there may be applications where it would be fine, such as a low voltage circuit.
Use the correct fuse and nothing else.
If it fits you are fine. You are at the same current and the voltage rating is higher.
Yes. It should be a 'heavy-duty' extension cord, rated for 15A or 20A .
Stock fuses are usually 15a, but I use a 20a.
No. If the voltage rating of a fuse is too low for the circuit in which it is fitted then, when the fuse operates (i.e. its link melts), the circuit voltage might maintain the resulting arc within the fuse, and it will fail to protect that circuit.
24) 15A fuse lights: turn/hazard (also fuse 4) 25) NO USE!!