No, the voltage rating should not be exceeded. However, you could use a 250v 10a fuse for a 125v 10a fuse.
no
yes
dnt noe!
2C:35-10A NEW JERSEY TITLE 2C (Criminal Code) Possession of a Controlled Substance
a 6.3 amp 125 volt fuse a 6.3 amp 250 volt or 300 volt is fine with similar time delays depending on application it may be easier to find a 10A it should still protect most of the components
no
Yes because it is of a higher rating. But make sure your equipment can take the rating too.
no
yes
I have a T10L 250V fuse in a control system and don not know what amperage this is. Can someone help ?? You can replace a 400ma fuse with a smaller amp fuse but never with a larger amp fuse. The amperage of the fuse is written on the fuse somewhere. If it has a 125 volt fuse then replace it with a 125 volt fuse. I got that, thanks!! The problem is that there is no amperage indicated on the fuse, only the T10L, and I was wondering if this is just the type of fuse, or if it was a codification of the amperage, like a 10A delayed or something... Class T fuses are non-renewable, current-limiting, and conform to UL 198H. Current ratings range from 0A to 1200A for 300V rated fuses, and 0A to 1,200A for 600VAC rated fuses (DC ratings are also available). The interrupting rating is 200kA rms symmetrical and these fuses are designed for protection of feeders and branch circuits in accordance with the NEC. Class T fuses must be labeled "Current Limiting", and may be labeled "Time Delay" if they pass time-delay requirements. I can find no listing for a T10L fuse in this class, so I cannot find the amp rating on this fuse. My guess is that it is a 10 amp fuse, which is far greater than a 400 ma fuse. So my answer is no, you cannot use this fuse.
120
The 312 designation means that it is a 312 series fuse made by a company called Littelfuse. This is a series of fast acting, glass cartridge fuse. Knowing the series allows you to look up the exact specifications for the fuse at the company's website. The fuse would have a rating impressed into one if the steel caps that looks like: 250V 312 5A Indicating it is a 250 Volt, 5A fuse, and is a Littelfuse 312 series, which implies fast acting, specific performance specifications and its size (31.75+/- 1.12mm x 6.25 +/- 0.3mm).
Rr t/lps its a 10a fuse
he man they got a #10a fuse in my 1993 vic.and i just needed to replace it so you may wanna try this quick fix!!!!!!!!!!!!!!
Engine bay fuse box (10A Radio Clock)
Under the hood #4 10a
Fuse 7: 10A Red; Buzzer Module, Stop Lamps Fuse