NO. At the very least... NOT FOR LONG. (1200ma = 1.2 amps). Your 3 amp monitor draws nearly 3 times the current that your supply can safely pass thru its circuitry. It will either fail due to burnt component(s) on its circuit board, or its internal protection circuit will trip, preventing said damage. SO... either way... NO.
No, you should not use a 12V 1200mA (1.2A) power supply on a 12V 3A monitor. The power supply needs to provide at least the same amount of current (or more) than the device it is powering. In this case, the 1.2A power supply would not be able to provide enough current for the 3A monitor, and it could potentially damage the power supply or not provide enough power for the monitor to function properly.
Yes. However you will not be able to see anything as the 12V 4.5A power supply does not come with a screen.
The + or - 12V output connection.
No, 3200 ma = 3.2 amps
Generally, yes. If your devise will only draw 80mA, it will do it whether it is connected to a supply that is capable of supplying 300mA or 800mA. The amperage rating on the power supply is the highest current that it is rated for. It will easily and safely provide less current. The load that is connected to the power supply will determine the actual amount of current.
12v 1.5amp power adapter is 18 Watt, can't load more than 18W power consumption,3amp power adapter can load 36W.
Yes. However you will not be able to see anything as the 12V 4.5A power supply does not come with a screen.
DC 12V power supply can convert 110/220V AC power source to 12V DC.
+12V, -12V, +5V, -5V, +3.3V
+3.3v +5v -5v +12v -12v
The input power of a computer Power Supply is usually 110-240VAC. The power supply usually transforms the input voltage into 3.3V, 5V, and 12V...all in DC. Different components require different voltage...either (1)ONE of a combination of these. 12V is one output voltage of the PSU(Power Supply)
The average price of a 12v power supply depends on the item for with the power supply is needed. Universal AC/DC adapters can be as little as a few dollars, to branded items with is dependent on the manufacturers pricing structure.
+12V, -12V, +5V, -5V, +3.3V
The + or - 12V output connection.
No, 3200 ma = 3.2 amps
It convert 220v or 115 to -12v and +12v by using many components and step down transformer.
The supply won't have to work as hard. It is perfectly acceptable, for example, to use a 1A, 12v supply to supply a 12v, .5A load. The current rating indicates the ability of the supply to dissipate heat caused by the current flowing. If the load current is above the power supply current rating, the power supply will overheat.
The power supply in a computer runs the 110 volts mains power through a transformer into a lower voltage, then lowers that into different voltages (+5v, -12v, +12v, +3.3v) which i believe are then stabilised independently. The power supply also handles the turning on/off the voltages triggered by a signal from the motherboard.