Yes, the 130 volts you read on the bulb is just the maximum it will handle. It will work perfectly in a 120 volt circuit.
Can you use a 120 volt bulb in a 130 volt socket?
Yes, the 130 volts you read on the bulb is the maximum it will handle. It will work perfectly on a 120 volt circuit and will actually last longer than a standard 120 volt bulb.
Yes, in fact that is what a rough service bulb is rated at. The bulb used on a 120 volt system will have a reduced wattage output as to what it would be on 130 volts.
Is the bulb a 1.5 volt bulb? A 3 volt bulb? A 12 volt bulb or a 120 volt bulb?Or does it have some other voltage such as 230 volts which is very common in Europe and many other countries of the world?What is the wattage of the "big light bulb"?This question cannot be answered without knowing at least the voltage and the wattage of the light bulb that is being asked about.
On this calculation I am assuming that the light bulb is using a 120 volt source. Watts = Amps x Volts. Amps = Watts/Volts, 40/120 = .33 amps. R = Volts/Amps, 120/.33 = 363.6 ohms resistance in the 40 watt light bulb.
Can you use a 120 volt bulb in a 130 volt socket?
Yes a 220 volt light bulb will run on a 120 volt circuit but at 1/4 of the wattage that the light bulb is rated at. A 100 watt light bulb on 220 would would be equal to a 25 watt light bult on 120 volt system.
Yes, the 130 volts you read on the bulb is the maximum it will handle. It will work perfectly on a 120 volt circuit and will actually last longer than a standard 120 volt bulb.
If you want your bulbs to last longer then use 130 volt bulb on a 120 volt system. The light emitted by a 130 volt bulb, when comparing it to a 120 volt bulb, will be a bit dimmer.
Electricity in your house or anywhere else comes in volts. When you screw in a light bulb, you screw it in to an electrical socket that has a certain number of volts. The socket can have 3 volts like a flash light, 12 volts like a car, 120 volts like American houses, or 240 volts like some Latin American houses. The light bulb is designed to work with one of those voltages. If you put a 240 volt bulb in a 120 volt socket, it will glow extremely dim. If you put a 120 volt light bulb in a 240 volt socket, it will glow extremely bright, but it will burn out in a short period of time. So you should put a 120 volt bulb in a 120 volt socket. In the United States, you will not have that trouble. However, if you take your yacht to a foreign country, you might put your light bulb in the wrong socket.Another AnswerA lamp will only operate at its rated power when subject to its rated voltage. So, if you want your lamp to operate at its rated power, you must connect it to a supply which provides its rated voltage
All other things being equal, an incandescent light should not "flicker" whether it is connected to 120 or 130 VAC.
Yes, you can easily use it. Just install it as you would any other 120 volt light fixture and change the bulb from a 240 volt bulb to a 120 volt bulb. It will work just fine.
Yes, in fact that is what a rough service bulb is rated at. The bulb used on a 120 volt system will have a reduced wattage output as to what it would be on 130 volts.
Yes it it is a 12 volt DC light bulb. It will not operate a household 120 volt light bulb.
Mine has a 25 watt 120 volt bulb in it.
If your supply voltage is 120 volts the impact of switching from a 145 volt lamp to a 130 volt lamp would be, the 130 volt bulb would not have the same lifetime as a lamp operating on 145 volts. The upside would be that the light output would be greater. This is based on both of the lamps having the same wattage rating.
Is the bulb a 1.5 volt bulb? A 3 volt bulb? A 12 volt bulb or a 120 volt bulb?Or does it have some other voltage such as 230 volts which is very common in Europe and many other countries of the world?What is the wattage of the "big light bulb"?This question cannot be answered without knowing at least the voltage and the wattage of the light bulb that is being asked about.