0
Yes, but you will not get 13 SEER. Whether or not it will satisfactorily cool your home properly is a crap shoot due to the system being mismatched. But you can do it and it may work. Not understanding why you would do this as the indoor coil is the least expensive component in a CAC system.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Can you use a 13 seer coil evaporator with a 10 seer condensor?
No,The differences are to great.You will end up with more problems than you want.10 seer condensor cant keep up with 13 seer evap.Suction pressure would be to much,and you never would acheive cooling temps.
Can replacing a 10 seer heat pump with a 13 seer hp affect the air handler that's 10 seer?
I have been told that if you are going to replace a 10 seer with a 13 seer, you have to change the coil on the inside unit to work with a 13 seer heap pump. In order to gain the extra energy efficiency yes you would need to replace the air handler as well.
Can you use a 13 seer condensor with a 10 seer coil?
it will work but you will not reach the rated seer rating. also you will have oil return problems due to less refrigerant volume (because the newer 13 seer units run a lower head pressure. this problem can be resolved by installing a thermostatic expansion valve (txv) but when it is all said and done just go to 410-a with both units because r-22 is not going to be reproduced after 2010.
Can you put a 13 seer condenser on a 10 seer evaporator?
Yes you can but you will NOT get the 13 seer rating from the condenser..
Can you put a 14 seer condenser on a 10 seer evaporator?
Yes but you won`t get 14 SEER.
Can replacing a 10 seer air handler with a 13 seer affect the compressor in the 10 seer condensing unit?
This could actually help your 10 seer condensor run a little more efficiently but make sure you find out if your old air handlers evaporator coil used a cap tube or a expansion valve to meter freon,because if u are going from a cap tube to a expansion valve evaporator coil u will need to add a hard to start kit and time delay for the compressor,or u will wind up hurting your compressor. any service company should be able help u with this. Good luck!
What is the seer rating on comfortmaker model nac048gkc3 air conditioner compressor unit?
10 SEER 4 ton
Can you use a 13 seer coil evaporator with a 10 seer condensor?
No,The differences are to great.You will end up with more problems than you want.10 seer condensor cant keep up with 13 seer evap.Suction pressure would be to much,and you never would acheive cooling temps.
Can replacing a 10 seer heat pump with a 13 seer hp affect the air handler that's 10 seer?
I have been told that if you are going to replace a 10 seer with a 13 seer, you have to change the coil on the inside unit to work with a 13 seer heap pump. In order to gain the extra energy efficiency yes you would need to replace the air handler as well.
What size condenser do you need to match a 5ton 10 seer coil that is at least 9 years old?
A 5 ton 10 SEER condenser will do it, but you can no longer buy a 10 SEER condenser. Replacing the condenser and not matching it with the proper evaporator coil will nullify the SEER value stated on the new unit and your actual SEER and EER will be anyone`s guess so do not pay any attention to it. The coil is the least expensive component of the 3 and now would be the time to upgrade away from R 22 which is currently being phased out and will become very expensive in the near future. Something to consider if that 9 year old coil were to fail before the new condenser does or if you were to develop a troublesome leak. But if you are dead set against the coil replacement I suppose a 4.5 or 5 ton, depending on the climate where you live will work. Get the lowest SEER currently available (13) since it will mean nothing.
What is the seer rating for a 2 ton Goodman ck24-1b condenser?
10 SEER is the rating for the Goodman CK24-1B.
What is the seer rating on a comfortmaker NAC036AKA4?
10 seer
Can you use a 13 seer condensor with a 10 seer coil?
it will work but you will not reach the rated seer rating. also you will have oil return problems due to less refrigerant volume (because the newer 13 seer units run a lower head pressure. this problem can be resolved by installing a thermostatic expansion valve (txv) but when it is all said and done just go to 410-a with both units because r-22 is not going to be reproduced after 2010.
What is the seer for ac model raka 030JAZ?
10 SEER
What is the seer rating of goodman ck30 1b?
10 Seer
Can you put a 13 seer condenser on a 10 seer evaporator?
Yes you can but you will NOT get the 13 seer rating from the condenser..
Can you put a 14 seer condenser on a 10 seer evaporator?
Yes but you won`t get 14 SEER.
