Yes but i woldn't do that
Use a dime to gap the plug. If u haven't got a dime use two nickles
Use a .5 feeler gauge for the TR Spark Plug Gap.
this depends on the spark plug you use. If you use autolite spark plugs you will need to gap them to 54 thousandths.
The spark plug gap for a 1999 Honda Civic LX is 0.044. You can use a plug gap tester to check the proper gap. You should always check the gap on all spark plugs prior to replacing the spark plugs.
If it's a 1981-83 with BP7ES NGK spark Plug use a 0.032 inch gap.
The actual spark plug gap should be listed on the emissions sticker on your hood. You would remove the spark plug, and use a feeler guage, or a spark plug gap tool to the gap specified on your emissions sticker. You would increase, or decrease the gap between the center electrode and the end of the plug. Hope this helps. mudmanben
Most use a .045 gap.
The gap is .043 and make sure you use Platimum tipped spark plugs!
There are none. I believe they use a perma gap plug.
The spark plug gap for a 1.6 liter Honda engine should be 0.044 inches. Most Honda engines use the same gap setting.
spark plug gap on 2005 mercury sable 3.0 =========================================================== Check the Vehicle Emissions Control Information ( VECI ) decal located in the front of the engine compartment ( it will show what type of spark plugs to use and the spark plug gap )
.044 is the spec, i suggest use KNG spark plug brand .044 is the spec, i suggest use KNG spark plug brand