Yes . Be sure to sand the surface with 40-60 grit paper. Solvent wipe with epoxy thinners. Apply 1 or 2 coats solvent free epoxy.
Use a product called ARMORGUARD, It is the Worlds Strongest Epoxy Proven, Tested and Guaranteed, ArmorGuard is 100% solid, non toxic and odorless. look on www.ecosmartepoxysystems.com for more information
You can use epoxy paint for appliances on plastic appliances. This type of paint is very durable on plastic surfaces.
Yes, you could paint kitchen appliances with special spray paint. Go to the larger home improvement centers and ask for assistance.
.
Epoxy should be adequate to seal the crack, but make sure it is of a suitable grade for use as a fuel-barrier. Some types of epoxy will gradually dissolve when exposed to ether or liquid fuel. Contact the manufacturer of the epoxy you intend to use if you aren't sure.
I would think plastic cement.ANS 2 - Epoxy or silicone.
You can remove epoxy from leather. Use a plastic knife to carefully scrape away as much as you can. After you have scraped away what you can, clean the rest with a cotton ball dipped into Acetone. Wipe away at the epoxy until it is gone.
Acrylic or epoxy based paint for cement surfaces is called cement paint.Cement that includes acrylic or epoxy to coat surfaces is called cement based paint.
If it is plastic (many speedboats are metal) it will be the plastic Epoxy Resin (exactly the same as the glue) with fiberglass cloth to reinforce it. Epoxy Resin is very strong but somewhat brittle (like concrete), the fiberglass prevent cracks in the Epoxy Resin from growing and reinforces it (like the steel rebar in reinforced concrete does).
If it's cracked, it might be made of fiberglass, or plastic. Fiberglass patch or two part epoxy.
some are made of epoxy holding fiberglass together.others are made of cellulose, in wood.
RTR Pipe(Reinforced Thermosetting Resin pipe) is a kind of composite thermosetting plastic pipe,combing Resin with Fiberglass Roving.In fact,the RTR pipe have a more approperiate name as GRE(Glass Reinforced Epoxy) Pipe, since that uses Epoxy Resin instead of Polyester.GRE Pipe have much superior properties than common RTR Pipe, especially in properties of high pressure resistant.
Epoxy or polyepoxide is a thermosetting polymer formed from reaction of an epoxide "resin" with polyamine "hardener". Epoxy has a wide range of applications, including fiber-reinforced plastic materials and general purpose adhesives.
Fibre-reinforced plastic (FRP) (also called fibre-reinforced polymer, or fiber-reinforced plastic) is a composite material made of a polymer matrix reinforced with fibres. The fibres are usually glass, carbon, aramid, or basalt. Rarely, other fibres such as paper, wood, or asbestos have been used. The polymer is usually an epoxy, vinylester, or polyester thermosetting plastic, though phenol formaldehyde resins are still in use.
Glass Reinforced Epoxy
Fibre-reinforced plastic (FRP) (also called fibre-reinforced polymer, or fiber-reinforced plastic) is a composite material made of a polymer matrix reinforced with fibres. The fibres are usually glass, carbon, aramid, or basalt. Rarely, other fibres such as paper, wood, or asbestos have been used. The polymer is usually an epoxy, vinylester, or polyester thermosetting plastic, though phenol formaldehyde resins are still in use.
Fibreglass resin is a polyester.
It is generally not recommended to put fiberglass over aluminum, however, people do it. An epoxy polymer resin is usually suggested, and the fiberglass should be very clean.
Generally, 2-Part Epoxy would be the glue of choice for metal to plastic.
if you are referring to fiberglass insulation, in modst cases it is. Fiberglass tubs and shower inserts are not. I have read where they are fire resistant but in reality they burn very nice. Fiberglass is not flammable but the epoxy used to bind it together is.