Want this question answered?
If the engine is a 2 cycle engine it has no crankcase and therefore there is no way to change the oil as it is mixed with the fuel.
2-cycle oil in most cases can be used as long as it is used in a 2-cycle motor. The answer to your question is NO, you cannot use 2 cycle oil in any engine. Only use 2 cycle oil, in a 2 cycle engine.
You can cut down trees with your lawnmower. Warning: Do not actually try to cut down a tree with your lawnmower. More than likely, the gas in the chainsaw is mixed with 2-cycle oil. If your mower also has a 2-cycle engine, nothing will happen. If your mower has a 4-cycle engine, the engine will probably smoke (bluish in color) until the oil is burnt up during combustion. At worst, the oil in the 2-cycle oil/gas mixture will foul up the spark plug and you will probably have to clean it pretty often until the oil is burnt up.
It depends, a chainsaw or weed wacker can be run upside down because the two cycle oil mixed in the gas is what lubes the engine. A Detroit Diesel two stroke engine can not.
Yes they will. They are both petroleum products. My chainsaw has a 2 cycle engine, which burns a mixture of gasoline and oil, and they mix very well with each other.
Use Craftsman 2 cycle oil mixed with gasoline for all size Craftsman chainsaws. (The above answer is WRONG. The question is for an ELECTRIC chainsaw.) Use SAE30 oil if you cannot get SEARS Craftsman chain saw oil.
Any premium 2 cycle oil.
50:1 with the appropriate two cycle oil.
If the engine has an oil sump and an oil filler spout, it is a 4-cycle engine. On a 2-cycle engine, oil must be added to the fuel.
from my experience with engines mostly small engines such as a chainsaw or a 90cc quad takes 2-cycle oil
Only if it is a 2 cycle engine and you mix the oil with the gasoline. If it is a 4 cycle engine, then using 2 cycle oil will destroy the engine over time. Use SAE 10w30 synthetic oil in your air cooled 4 cycle engine.
You can not use 4-cycle oil in a 2-cycle engine because the four cycle oil will not mix it is not designed to.Two cycle oil is designed to mix with fule to lube the two cycle parts in your motor.